8655 - Overview

This is an LED light for a variety of refrigerator models. This 3.8W LED light is used to shine and adequately light the contents of your refrigerator when you open its door. If your current light is significantly dimmer than normal, or simply not working anymore, it will need to be replaced. To replace this bulb, unplug your fridge momen...Read moretarily, and then simply unthread the old one and screw in the new one. This bulb is sold individually and does not come with any other parts.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This genuine OEM carriage bolt is used to secure various parts in lawn and garden outdoor equipment. The bolt has a round head with a square area underneath it that prevents the bolt from turning and coming loose when it is installed. The bolt shaft has a diameter of 5/16 inches, with 18 threads per inch and the threaded portion of the bo...Read morelt is 0.62 inches long. If the bolt is corroded, the threads are worn down, or the head is damaged or deformed, you will need to replace the bolt to keep your equipment parts secured and functioning efficiently. To replace the bolt, first remove the nut using a wrench or socket. Once the nut is removed, you can unthread the bolt. Insert the new bolt in position, thread the nut on and use a wrench to tighten it. Be careful not to overtighten the bolt to avoid damaging it or stripping the threads. This carriage bolt is sold individually.

This is an original part sourced directly from the manufacturer. This 13-ounce can of red spray paint was designed for use on a variety of Troy-Bilt and MTD equipment and is an identical match for paint needed for touch-ups. One can is included per order.

It is a genuine item that is supplied by the original manufacturer for use with a variety of lawn and garden equipment. A washer is a special part which helps to provide a tight fit between connected components. It is a standard hardware which may have multiple applications. This part provides an identical replacement for a damaged or a m...Read moreissing hardware that was installed on a new unit. Check the diagrams for your specific model for the exact location and the correct application of this flat washer. Note, it is made of durable metal and is sold individually.

This OEM Top Locknut measures 5/16x18, is made of metal, and it isused to secure parts in place and prevent backing out from vibration. Replacing this part varies in difficulty depending on the part it is securing and the equipment in question, but it is generally an easy job according to our customers. Installation requires a wrench or socket.

This is a genuine part that is supplied by the original manufacturer for use with MTD and Troy-Bilt mulching mowers. The drive belt connects the engine pulley to the transmission pulley to move the mower forward. This part is made of rubber and is sold individually. For this repair, you will need a screwdriver, a socket wrench, and a pair of needle nose pliers to aid you.

When the lower panel of a gas grill rattles or pulls away from the cabinet, worn mounting hardware may be responsible. This hardware pack provides the fasteners and washers needed to hold a compatible bottom panel securely in position. Check for loose screws, damaged threads, missing washers, panel distortion, and rust around the mounting...Read more points before ordering. A badly corroded panel or frame may also require replacement. Use the grills full model and serial details to confirm fit. Shut off and disconnect the fuel source, then wait until every surface is cool. Support the panel during installation and start all screws loosely before tightening them evenly.