86550001 (2013LP) Weber Grill - Overview

When the lower panel of a gas grill rattles or pulls away from the cabinet, worn mounting hardware may be responsible. This hardware pack provides the fasteners and washers needed to hold a compatible bottom panel securely in position. Check for loose screws, damaged threads, missing washers, panel distortion, and rust around the mounting...Read more points before ordering. A badly corroded panel or frame may also require replacement. Use the grills full model and serial details to confirm fit. Shut off and disconnect the fuel source, then wait until every surface is cool. Support the panel during installation and start all screws loosely before tightening them evenly.

An authentic replacement handle that is supplied from original equipment manufacturer for use with Weber grills. It is a high quality item that provide user with a comfortable grip for the lid. Please note one durable stainless steel handle with the hardware to secure it is included per order.

This OEM part is used with the Genesis Grill series. This part comes with detailed installation instructions, which are also available on Weber's website. This part does include two attachment screws.

Restore your grill’s performance with this genuine replacement burner tube set, designed specifically for Weber gas grills and sourced directly from the original manufacturer. Made from durable stainless steel, these burners are built to withstand high heat and resist corrosion, ensuring long-lasting use. The set includes three (3) burner...Read more tubes, each featuring an igniter mounting bracket, an air adjustment shutter, and a spider screen to prevent blockages from insects and debris. Installation is quick and straightforward—no special tools required, just a standard screwdriver. To begin, ensure the gas tank is disconnected for safety. Then, remove the screws securing the old burners and detach them from the control valves. Next, position the new burners and secure them using the included hardware. Once everything is in place, reconnect the gas tank and test the burners to confirm proper operation. This replacement set is perfect for grill owners looking to maintain even heat distribution and consistent flame performance with minimal effort.

These are authentic manufacturer-sourced replacement parts that are supplied for use with Weber grills. This is the hardware kit which is used to secure the burner tubes and grease tray rails, please make sure to check appropriate diagrams of your model for correct application. This item includes four high-quality metal screws, keep in mi...Read morend you will need a wrench or a flat-head screwdriver to install or remove the hardware.

This is an authentic Weber replacement part, sourced from the original manufacturer for use with outdoor gas grills. The metal heat shield is used to deflect heat produced within the firebox away from the control panel assembly. This item is available as an individual replacement part, please see illustrated diagram for associative parts.

This is an authentic Weber replacement part, sourced from the original manufacturer for use with outdoor gas grills. This metal panel is used to cover the rear of the stand or frame. The hardware used to mount the rear panel is included, please see model diagram for associative parts.

The bottom panel attaches to the rear panel and the side frames. This panel is an OEM from Weber for use in grills. It is available as an individual replacement part. If this item becomes broken it will need to be replaced and may require a wrench set and a screwdriver during the installation.

This genuine OEM repair kit is used with Weber grills. This is a four-part assembly that includes two posts and two retaining clips. The posts are designed to hold the lid to the body of the grill while still allowing it to move freely like a hinge.

This is a genuine Weber part used with the Genesis, Summit, and Spirit grills. Each pack includes two hinge bolts and two nuts; each pack has the hardware for one door. The top pin of the screws fit into pre-drilled holes in the frame of the front doors. They are held onto the doors with the provided bolts.