86150-3 General Electric Freezer - Parts

This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear. It is an 18ml bottle that contains paint and a small brush for easy application. It is a little over 2 inches tall. This is an OEM part that is sourced directl...Read morey from the genuine manufacturer, and is meant to be an exact match to the color of the appliance. If the appliance is not white, please see other colors such as almond or black.

This is a plastic OEM drain plug that is attached to the drain system of your appliance and is compatible with several different makes and models of refrigerators, freezers, and air conditioners. This drain plug is used to prevent water from leaking out of the incorrect drain system within the appliance and is normally removed for cleanin...Read moreg and maintenance. If you notice water leaking inside of your appliance, the plug may be improperly positioned or may need replacing. To replace, simply pull off the damaged plug and insert the new plug in its place.

This part is found in freezers. The stud may have broken over time and may no longer be supporting the shelf. If your shelf is not staying in place or you are not able to adjust heights, it may be due to the support being broken. To complete this repair, you will need to open the fridge and remove the drawer and the shelf. To remove the o...Read moreld stud, you will need a 3/4-inch wrench to twist it off. The new part should push into place and will need to be turned with your wrench to be secured into place.

Better freezer organization begins with shelf trim that stays firmly attached. A damaged front strip can leave the shelf unstable, create rough edges, or allow small items to shift. Check the trim length, color, attachment style, and shelf location before ordering because similar pieces may differ. Match the replacement to the full freeze...Read morer model. Remove food from the shelf, clean and dry the mounting edge, and snap the new trim into place carefully. Make sure it is secure before reloading the shelf.

This part provides protection for the compressor motor against excessive current and excessive temperature use.

A thermostat that regulates the temperature of the freezer.