860M Simplicity Snow Blower - Parts

It is a genuine item that is supplied by the original equipment manufacturer for use in walk-behind mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity. The self tapping screw attaches to the front wheel drive rear baffle. A flat head screwdriver will be necessary during the installation of this part. Over time this part may...Read more become stripped and will need to be replaced. Keep in mind this part is made of metal and is sold individually.

An authentic high quality retainer that is supplied directly from original equipment manufacturer for use with Murray, Snapper and Simplicity snowblowers. This part is secured on the bottom of the chute assembly, it helps to secure it to the auger housing. It is a durable plastic item that is sold individually, please note the hardware to secure it is sold separately.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.

This part is available as an individual replacement part. The traction belt wraps around the idler pulley. During replacement, it may require a screwdriver to help install the part correctly. It will need to be replaced if it stretches or breaks. This genuine item is supplied by the original equipment manufacturer for use with snow throwers made by Simplicity, Murray, and Snapper.

This replacement gasket is used to create an air tight seal between the crackcase and the cylinder assembly. Over time gaskets tend to deteriorate and will eventually need to be replaced. It is an authentic OEM sourced item that is designed for use with Briggs and Stratton engines. This item is made from high quality composite material and it is sold individually.

This is an OEM bushing made for use with snow blowers and snow blower tractor attachments. Made of high-quality metal, this bushing is sold as an individual part and features a 0.75-inch inner-diameter. This bushing is normally attached to the axle and chassis to reduce friction and vibrations during operation and movement of your snow bl...Read moreower. If your snow blower is experiencing suspension issues and problems with stability, the bushing may need to be replaced. Check your user manual or diagrams for the best placement and attachment.?

The Roll Pin is an individually sold, 1/8x3/4 inch, black metal pin. It's used to secure the position of two or more parts of a machine relative to each other. The part is rated as "Easy" to install and requires pliers, a hammer, and punch. If the part breaks the parts will come apart. When broken, damaged, worn or missing, the part shoul...Read mored be replaced. Refer to your make, model and diagrams to check if this is the right part for you.

This item is a genuine OEM replacement part that is intended to be used with lawnmower engines from Briggs & Stratton and Toro. The metal needle is used as a valve that regulates the amount of fuel sent to the carburetor as the bowl fills and drains. This item is available as an individual replacement part.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn and garden equipment. It is an identical replacement for a missing or damaged hold down that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for...Read more the correct location and application of this hardware. Keep in mind this high-quality component is made of durable black plastic and is sold individually.

The stop switch is made of plastic and metal and helps to turn off the device. This is an authentic replacement part that is sourced from the original manufacturer for use with engines, generators, snowthrowers, and blower-vacuums made by Toro, Murray, and Briggs & Stratton. This part is available individually. During the installation pro...Read morecess, a wrench set and wire stripping pliers might be needed to replace this part. It may become bent or broken and will need to be replaced.