860D Simplicity Snow Blower - Parts

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn and garden equipment. It is an identical replacement for a missing or damaged hold down that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for...Read more the correct location and application of this hardware. Keep in mind this high-quality component is made of durable black plastic and is sold individually.

This Spring is used to hold down the chute. It's rated as "Easy" to use, and requires a wrench or socket. The part comes in gold metal. If worn, damaged broken, or missing, it should be replaced. Refer to your make, model and diagrams to check if this is the correct part for you.

The Oil Seal is used to seal the gear case where the axle extends from the case, around the axle shaft. It's rated as "Easy" to install, and will require a wrench set and seal puller. When installing, use something big enough to make contact with the entire seal, such as a PVC pipe, and tap gently into place. If broken, you will see oil ...Read moreleaking, and the part must be replaced. This gray, rubber part is sold individually. Refer to your make, model and diagrams to ensure this is the correct part for you.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The bearing flange attaches to the side of the auger housing and is used to support the auger shaft. This item is sold as an individual replacement part.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This metal washer is a genuine OEM part that is commonly used on various lawn equipment and is typically used to secure and seal connected components. This washer is high-quality and is sold individually, so consult with the relevant diagrams for your model to correctly determine where this washer would be for your equipment, and whether you need one, or more.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

This is an authentic item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity snowthrowers. It is an identical replacement for a missing or a faulty belt that helps to drive the augers. Please make sure to refer to the appropriate diagrams of your model for the correct location an...Read mored application of this component. Keep in mind this high-quality auger drive belt is made of durable rubber and is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with snowthrowers and lawnmowers. The special capscrew is used with several different models of equipment, and the application of the capscrew can vary based on the model of snowthrower or lawnmower. This capscrew is available as an individual replacement part, please see model diagram for associative parts.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.