All Installation Instructions for Magic Chef Cooktop 85TW-4K

The grommets came apart metal from rubber.

24 of 29 people found this instruction helpful.

Frank from Pierce, ID
Really Easy
Less than 15 mins

I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price.

Was this helpful?

range top loose, grommets missing

12 of 16 people found this instruction helpful.

joseph from wildomar, CA
Really Easy
Less than 15 mins

very easy to push each grommet into range top holes

Was this helpful?

igniter would no longer work, it would stick

9 of 13 people found this instruction helpful.

Randall from Rochester, NY
Really Easy
Less than 15 mins
Screw drivers

pull knob off streight out. remove two phillips head screws, disconnect wire to disassemble. To reassemble reattatch wire to replacement igniter, screw in two phillips head screws and push on the knob.

Other Parts Used:

Igniter Knob

Burner Control Valve with Igniter

Was this helpful?

missing gromet

5 of 8 people found this instruction helpful.

Hal from National City, CA
Really Easy
Less than 15 mins

Pushed into hole by hand, really simple

Was this helpful?

Wouldn't ignite

2 of 2 people found this instruction helpful.

William from ARCHER, FL
Really Easy
30 - 60 mins

Pulled knob,removed 2 screws removed wire,removed old ignitor repl. With new reversed procedure,done

Was this helpful?

Old knob is broken

2 of 4 people found this instruction helpful.

DONNA from WARREN, PA
Really Easy
Less than 15 mins

This item had to be returned. Didn"t fit. Our shaft is shorter, and the new knob would not stay on.

Was this helpful?

Igniter failed

2 of 10 people found this instruction helpful.

Paul from Niland, CA
Really Easy
Less than 15 mins
Screw drivers

The igniter on our RV stove top failed after 4 years of operation. The repair took about 8 minutes and everything works fine.

Other Parts Used:

Burner Control Valve with Igniter

Range Surface Burner Igniter Wire Harness

Was this helpful?

Lost on of the Rubber Grommet holding the stove grate

Martin from Millersburg, MI
Really Easy
Less than 15 mins

So simple would be embarrassed to give any instructions; it is so self evident.

Was this helpful?

The rotating ignitor knob on my RV stove broke

Matthew from Vancouver, WA
Really Easy
Less than 15 mins

The old knob simply slides off the shaft. I aligned the fins on the back of the new knob with the grooves on the shaft of the ignitor and pressed the new knob on.

Was this helpful?

range top was missing one of the rubber grommets used to hold the grate.

John from Elizabeth, CO
Really Easy
Less than 15 mins

Just pushed the new grommet into the hole. The grommet fit just fine and took about 10 seconds to install.

Was this helpful?

Rubber grommet for stove top cover

Lisa from Plymouth, MA
Really Easy
Less than 15 mins

I ordered the grommet... Didn't match the others ... But it fit on , and will do the job

Was this helpful?

original grommets broken

William from Richwood, OH
Very Difficult
More than 2 hours

The new grommets were NOT the correct parts, too big, so there was no repair.

Was this helpful?

85TW-4K Magic Chef Cooktop - Instructions