8560 Simplicity Snow Blower - Parts

The stop switch is made of plastic and metal and helps to turn off the device. This is an authentic replacement part that is sourced from the original manufacturer for use with engines, generators, snowthrowers, and blower-vacuums made by Toro, Murray, and Briggs & Stratton. This part is available individually. During the installation pro...Read morecess, a wrench set and wire stripping pliers might be needed to replace this part. It may become bent or broken and will need to be replaced.

This engine ring set is a genuine OEM replacement designed for small engine applications. It helps seal the cylinder properly to maintain compression, reduce oil consumption, and restore smooth, efficient engine operation. Ideal for engine rebuilds or repairs, this ring set should be replaced when wear causes power loss, excessive oil use, or reduced overall performance.

This 5/8 Washer is an OEM part that spreads load under a bolt or nut in a variety of different lawn equipment. This washer has an inside diameter of 0.625 inches, or 5/8. It is silver in color, made of metal, and sold individually. Over time, the washer may become damaged due to fatigue, and need to be replaced. Depending on the locatio...Read moren of the bolt or nut it is associated with, this repair may vary in difficulty, but generally it should be easy and not require any special tools.

This part is an OEM from Briggs & Stratton. The air cleaner gasket is constructed of a cardboard composite, and is designed for use with many lawn and garden engines. The gasket is often fitted in the carburetor, providing protection from friction and leakage. A screwdriver, pliers and a socket set are helpful with making the replacement....Read more The air cleaner gasket is sold individually. This item is also included in the (nikki carburetor) carburetor kit overhaul (696146).

This is an authentic OEM component from Toro. The float bowl gasket is made for use with many lawn and garden engines. The flexible plastic gasket is fitted in the carburetor, securing and protecting the float bowl components from dust and leakage. A screwdriver, socket and wrench set are necessary for the installation. The float bowl gasket is sold individually.

This is a genuine OEM sourced rebuild kit designed for use with Briggs and Stratton engines. This kit contains all the necessary gaskets, diaphragms and other parts to rebuild your carburetor. It helps to fix common problems associated with worn out gaskets or diaphragms, including leaks and sluggish performance and other carburetor relat...Read moreed issues. Includes: float bowl gasket; pin-float hinge; kit-idle speed; valve-float needle; gasket-intake; gasket-intake; plug-welch; gasket-air cleaner; seal-choke; throttle shaft Replacing these items you would need a screwdriver and pliers.

This is a genuine OEM supplied replacement part that is specially designed for Briggs and Stratton engines that are commonly installed on lawn and garden equipment. It is the part that the piston is attached to. The piston is a central component of a two-cycle engine, it provides both the compression within the engine and it transfers the...Read more energy from combustion to the crankshaft which creates rotation. Please note this high-quality rod-connecting is made of durable metal and is sold individually.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This metal washer is a genuine OEM part that is commonly used on various lawn equipment and is typically used to secure and seal connected components. This washer is high-quality and is sold individually, so consult with the relevant diagrams for your model to correctly determine where this washer would be for your equipment, and whether you need one, or more.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

This is an authentic OEM sourced part that is intended to be used with small engines from Briggs & Stratton and Toro. The shut-off valve attaches to the bottom of the fuel tank and is used to link the fuel line and to control the flow of fuel that goes to the engine. This item is available as an individual replacement part.