8522 - Parts

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This part has been sourced from the original manufacturer and is intended to be used with walk-behind lawnmowers from Husqvarna, Poulan, Weed Eater, and Jonsered. The metal pawl is used to secure the pinion to the transmission axle to allow the two parts to rotate in unison. This drive pawl is priced as a single item, please note two may be needed.

This is a genuine Craftsman part for use with Lawn Mowers. The drive gear attaches on the inner side of the drive wheel. The drive gear meshes with the pinion in the drive wheel to propel the mower. The most common reason for replacing the gear is when the self-propel system will not drive one or both wheels. This part is sold individuall...Read morey. The tools that you will need to replace the gear is a 12mm socket and snap-ring pliers.

It is a genuine item that is supplied by the original equipment manufacturer for use with Snapper rear tine tillers. This is an identical replacement for a missing or a faulty spring that attaches to the control cable, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hard...Read moreware. Keep in mind this high-quality component is made of durable metal and is sold individually. Note the cable is sold separately.

This OEM plug is sold individually and measures just over an inch in diameter. It attaches to the case cove of your equipment, is black in color, made of plastic and will need to be replaced when the old plug is dry out, cracking, or generally showing signs of wear. You may observe grease leaking out if this part needs replacing. Dirt c...Read morean also get into the case if it is cracked, and cause problems over time such as a grinding noise. This is a somewhat challenging repair that requires a screwdriver, pliers, and a wrench.

This item is available as an individual replacement and is made out of durable materials. It is a Snapper replacement part directly sourced from the manufacturer for use in cultivators. During the installation process, a set of pliers and an adjustable wrench might be needed to replace this item. This part may become broken or stretched and will need to be replaced.

The V-belt is an essential part for driving your tiller. This is an OEM V-belt, 0.5x62 inches in dimension, and black in color. Made of rubber, the V-belt can crack, fray, and wear over time and due to excessive stress. When this occurs, your tiller will no longer move and you will know to replace the V belt. This is an easy repair that...Read more just requires a pair of pliers to carry out. Attach the new belt on the drive pulley from the engine, ensuring you release tension on the idler pulley when installing.

This is a genuine Craftsman replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal blade attaches to the blade adapter and is used to cut grass. This item may require a wrench to install and it is recommended to wear gloves or use a wood block to lock the old blade to remove it. This blade is sold as an individual replacement part.

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

This replacement part is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan walk-behind lawn mowers. It attached to the back of the mower deck to protect users feet and legs from grass clippings and debris. It is a high-quality component which is made of durable plastic and it is sold individually, please note the hardware to secure it is sold separately.

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of h...Read moreigh-quality metal and it is sold individually, you will need a wrench to secure or remove it.

This part is available as an individual replacement part and is made of plastic. The bushing goes between the worm shaft support bracket and the worm shaft. It will need to be replaced if it breaks. A set of pliers might be necessary during the installation of this item. This is a Snapper replacement part directly sourced from the manufacturer for use in snow throwers.