Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
food does not get hot, carousel did not turn, all other indicators worked
3 of 3 peoplefound this instruction helpful.
John from SEVERN, MD
Really Easy
30 - 60 mins
Screw drivers
Read the troubleshooting section on this site. Figured it was an interlock problem because the food was not getting hot (magentron not turning on) and the carousel was not turning. Did not think both the carousel motor and magnetron failed at same time, thus indicated an interlock problem. The interlock switches are actuated by the door
... Read morelatch. Replaced the assembly locker piece with all three switches (only a $20 dollar part) and microwave was fully operational again. Wife and kids think I am a hero.
Read less
Was this helpful?
Thank you for voting!
UNABLE TO INSTALL DUE TO DAMAGED IN SHIPPING
3 of 4 peoplefound this instruction helpful.
Tina from EL DORADO, KS
Very Difficult
More than 2 hours
WORTHLESS...I EMAILED YOU ON 2/7/22 AFTER RECEIVING THE DAMAGED FILTER DUE TO NOT SHIPPING IN A HARD OR SOMETHING IN THE ENVELOPE TO PROTECT THE FILTER FROM BEING BENT. I HAVE NOT HAD ANY RESPONSE FROM YOU FOR THE DAMAGED FILTER OR WHEN I CAN EXPECT ONE THAT I CAN USE. UNSATISIFACTORY SERVICE!
Was this helpful?
Thank you for voting!
Door switch was burnt out
5 of 10 peoplefound this instruction helpful.
Edward from ORCHARD PARK, NY
Really Easy
15 - 30 mins
Nutdriver
Removed outer cover
removed lower door switch
installed new switch
Wa La!
Was this helpful?
Thank you for voting!
Replacing top vent filter
2 of 3 peoplefound this instruction helpful.
Paul from CHARLOTTESVLE, VA
Very Easy
15 - 30 mins
Screw drivers
Followed owners manual instructions to the letter: removed two top screws, opened the unit door so I could slide out the old filter. We don’t cook much at all in the unit, mostly just heating coffee and reheating leftovers. BUT! The top grill was pretty greasy and needed hot soapy water to clean, including in the depths of the top area. T
... Read morehe whole process, especially the company website for part ID and purchase, was slick!
Read less
Was this helpful?
Thank you for voting!
Broken clip that holds the grill in place.
4 of 9 peoplefound this instruction helpful.
Ronald from LAKE WORTH, FL
Easy
Less than 15 mins
Screw drivers
Not hard to replace. Just remember the clip goes under the top not on top of the top.
Was this helpful?
Thank you for voting!
did not include screw to secure it to celing of the microwave rempved
2 of 3 peoplefound this instruction helpful.
Bill from TAMARAC, FL
Really Easy
30 - 60 mins
Screw drivers
removed old cover put the new one in place found right size screw from my tool box, tightened it.
Was this helpful?
Thank you for voting!
The new part was too thick for the worn out plastic ring which is obsolete.
1 personfound this instruction helpful.
James from PURCELLVILLE, VA
A Bit Difficult
30 - 60 mins
Needed to raise the part to match the ring. I used peanut butter to hold plastic shim while replacing to hold it in place. Built in Oct. 2009.
Was this helpful?
Thank you for voting!
Microwave fan would come on when door open. Timer and unit would not switch on.
1 personfound this instruction helpful.
Dick from SANDY, UT
Really Easy
30 - 60 mins
Screw drivers
I looked up my problem on the internet and found a very helpful video. Microwave on video was different brand but the internals and methods were very much the same. The video made it simple and easy to fix. Found the replacement switch on the LG parts site and ordered. Two different switch types. One with red switch, the other green.
... Read more Part was $7.28. Saved a bundle in service costs. Here is the repair video.
Originally called it "grease filter" until I found very small print "air filter" on damaged original. Part #PS3527528
Slipped into place with ease -- right bottom of microwave
Was this helpful?
Thank you for voting!
Change the Charcoal Filter and Microwave Grease Filter (Normal Maintenance)
1 personfound this instruction helpful.
Lynwood from GONZALES, LA
Very Easy
Less than 15 mins
Screw drivers
Both were easy to replace. I followed the instructions in the users manual which came with the microwave. On the grease filter, I removed the 2 Phillips head screws which hold the grill plate in place. I had to open the microwave all the way to remove the grill plate. The grease filter was easy to remove and replace with a new one. I then
... Read more put the grill back in and secured it with the 2 screws. Easy Peasy!
My Orders
