8487 - Parts

This is a plastic replacement part made for Snapper and Murray machinery. It is made by the original manufacturer. This type of bearing is used to separate parts to reduce friction and wear on those parts. Therefore, this is a common and easy repair.

Introducing the Murray Chute, a discharge deflector shield designed specially for lawn tractors. This essential component covers the discharge port on your mower's deck, directing grass clippings away from the deck for a clean and efficient mowing experience. With its sturdy construction, it ensures long-lasting performance and durability...Read more. Remember to wear work gloves to protect your hands when installing this part. Utilize this product and notice the difference it makes in maintaining the cleanliness and functionality of your lawn tractor. Trust in the quality of Murray products for your lawn care needs.

Bearing yoke

It is a genuine item that is supplied by the original equipment manufacturer for use with Snapper riding lawn mowers and garden tractors. The purpose of this gage wheel is to support the deck allowing for easy transportation. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. This hi...Read moregh-quality wheel is made of durable rubber and is sold individually, keep in mind the hardware to secure it is sold separately. Please make sure to check the diagrams of your model for the correct location and application of this part.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

This is an authentic replacement part manufactured for use with Snapper lawnmowers. The special nut is commonly used to fasten the bolt that goes through the rear wheel hub. This nut is available as an individual replacement part, please see the model diagram for associative parts.

The drive belt wraps around the spindle pulley and is available as an individual replacement part. This is an original Snapper part designed for rear engine rider mowers. The belt will need to be replaced if it becomes stretched or broken. During installation, a wrench may be needed to replace this item.

This authentic OEM sourced replacement part is specially designed for use with Murray, Snapper lawn and garden equipment. Ball bearings are generally utilized to reduce the friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces frictio...Read moren. Unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement to maintain peak performance. Keep in mind this high-quality item is made of durable metal and is sold individually.

This gas cap/gauge is an authentic OEM replacement part supplied by the original equipment manufacturer. It is compatible with approximately 150 models of rear engine riders. This part is designed to seal the fuel tank, as well as provide a measurement of the amount of fuel inside. No tools are necessary to replace this part. Simply unscrew the old cap/gauge and replace it with the new one.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This is an authentic replacement part manufactured for use with rear engine mowers and lawn tractors from Craftsman. The user will need to replace this hex nut if it is missing or not working correctly. This hex nut screws onto the transmission link lever. This part is made of durable material and sold individually.