8465 Snapper - Parts

This part is available individually and is made of plastic and metal. The limit switch connects to the interlock and helps to turn off the engine if there is a problem. A wrench might be required during the replacement of this part. It will require replacing if it becomes broken. This is a Murray, Snapper, and Simplicity replacement part directly sourced from the manufacturer for use in lawn tractors.

Roll pin 1/4x1-1/4

This is a genuine part which is supplied directly from the original equipment manufacturer and is used with Craftsman lawn tractors. The solenoid support engages and routes the battery electrical supply to the engine starter when the ignition switch is turned to the start position. This part is made of hard plastic and metal, it is also s...Read moreold individually. The tools you will need for this repair are a screwdriver and socket wrench.

This authentic OEM sourced replacement part is specially designed for use with Murray, Snapper lawn and garden equipment. Ball bearings are generally utilized to reduce the friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces frictio...Read moren. Unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement to maintain peak performance. Keep in mind this high-quality item is made of durable metal and is sold individually.

This gas cap/gauge is an authentic OEM replacement part supplied by the original equipment manufacturer. It is compatible with approximately 150 models of rear engine riders. This part is designed to seal the fuel tank, as well as provide a measurement of the amount of fuel inside. No tools are necessary to replace this part. Simply unscrew the old cap/gauge and replace it with the new one.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

The pushnut retainer goes next to the ball bearing. This is available as an individual replacement part. This item is an OEM from Snapper, Murray, and Simplicity for use in lawn mowers, lawn tractors, and snowblowers. It might require a wrench to replace this part. It is made of metal and will need to be replaced if it breaks.

This is an authentic replacement part manufactured for use with rear engine mowers and lawn tractors from Craftsman. The user will need to replace this hex nut if it is missing or not working correctly. This hex nut screws onto the transmission link lever. This part is made of durable material and sold individually.

This is an authentic OEM sourced replacement part that has been sourced from the original manufacturer to be used with lawn tractors from Snapper and Simplicity. The metal bushing fits into the front wheel mounting bracket. This item is used to provide spacing between the caster and the bracket assembly. The caster busing is sold individually.

It is a genuine OEM sourced component which is specially designed for use with Murray and Snapper lawn and garden equipment. The purpose of this part is to provide a tight seal between connected parts, unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality h...Read moreardware is made of durable nylon and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this thrust washer.

This authentic OEM sourced part is made for use with Murray and Snapper riding lawn mowers and garden tractors. It is one of the special pins which are utilized to secure components. If it is damaged or is missing, this will provide an identical replacement for the original component that was installed on a new equipment. This part is a s...Read moretandard hardware which may have multiple applications. Please refer to the appropriate diagrams for your model to ensure the exact location of this roll pin. One durable metal pin is included.