8436 Snapper - Parts

This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits yo...Read moreur model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause. This is a very easy part to repair and does not require any tools.

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.

This genuine OEM supplied replacement blade is commonly utilized on Snapper and Simplicity tractors and riding lawn mowers. It is a high lift blade which can be used to bag or side discharge the grass clippings. Please note this durable steel blade is sold individually, most units would utilize two of these blades. Replacing this blade is...Read more a simple task that should only require a wrench to remove and secure the blade nut.

This item has been sourced from the original manufacturer to be used with riding lawnmowers from Murray, Snapper, and Simplicity. The metal spindle shaft fits into the spindle housing and is used to link the deck pulley and the blade. This item is sold as an individual replacement part.

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

This is a genuine, OEM sourced replacement part that is intended to be used with riding lawnmowers from Snapper and simplicity. The metal washer is used to provide spacing between the top of the blade and the spindle bearing. This item is sold as an individual replacement part.

This is an authentic replacement part manufactured for use with snow throwers. The special auger flite shoe connects to the auger and is used to collect snow in the auger to be sent through the shoot. This auger shoe is available as an individual replacement part, please see model diagram for associative parts.

(s) handle lower

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.

This is a genuine OEM sourced replacement v-belt which is specially designed for use with Snapper snow blowers. It is the main belt which is used to drive the augers, please make sure to check appropriate diagrams of your model for correct application of this item. Over time belts tend to wear out and stretch eventually requiring replacem...Read moreent to maintain a working unit. It is a high-quality component which is made of durable rubber and it is sold individually.

This is a genuine manufacturer-approved replacement part which is specially designed for Snapper and Simplicity lawn and garden equipment. Bushings are generally utilized to provide a tight fit between connected components while allowing for movement with minimum friction. If the bushing is damaged or is missing, this will provide an iden...Read moretical replacement for the original hardware that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the proper repair procedure. Note, one durable metal bushing is included.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.