82839 ((HT18330)(Series 4)) Snapper Lawn Tractor - Parts

Lube fitting 3/16 pr

This OEM valve stem regulates air flow in and out of tires, allowing for inflation and deflation. It features an 11.5mm outer diameter, 31.75mm total length, and 22.35mm effective length. It is a metal valve with a threaded plastic cap, housed in plastic. To determine if a valve stem is broken, you can check for signs of damage or leakage...Read more. Signs of a broken valve stem include cracks, bends, or air leakage, which should be replaced to prevent tire deflation and operational issues. To remove the valve stem, fully deflate the tire first. Then, disconnect the tire from the rim to access the inner part of the rim. You may need to unthread any securing nuts if present. Use a pair of pliers to grip at the base of the valve stem and then unscrew it from the rim hole.

This replacement ignition key pair is sourced from the original equipment manufacturer. It is specially designed for use with Murray, Snapper, and Simplicity riding lawn mowers and garden tractors. This is a safety feature to prevent any unauthorized use of the mower. The key is inserted into the ignition switch allowing a user to start t...Read morehe unit. Make sure to refer to the owner's manual for your equipment to ensure the correct application. Note, this high-quality metal ignition key is sold in a pack of two.

This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. If broken, there may be a leak or blockage and the part should be replaced. The part may also need to be replaced according to manufacturer'...Read mores specifications, and is a manufacturer-approved part. Refer to your make, model and diagrams to ensure this part is correct.

Ohms 5/16f

This is an authentic replacement part, sourced from the original manufacturer for use with riding lawnmowers from Snapper and Murray. The durable plastic discharge chute connects to the side of the mower's deck and is used to guide grass clippings as they are discharged from the deck. This item is available as an individual replacement part.

This is an original Snapper replacement part manufactured for use with rear engine riding lawnmowers. The special aluminum spacer is used to secure the gage wheel. The spacer is hollow, and supports the bolt that goes through the wheel to secure it to the deck. The spacer is sold individually.

An authentic manufacturer sourced part which is supplied for use with Briggs and Stratton, Murray, and Snapper lawn and garden equipment. This replacement nut has a few different applications, please make sure to check the appropriate parts lists and diagrams of your model for the exact location of this hardware. Note, this durable metal nut is sold individually. You will need a wrench to secure or remove it.

This is a genuine OEM sourced item that is supplied for use with lawn and garden equipment. It is an identical replacement for a missing or a damaged nut that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an original manufacturer supplied replacement bolt designed for use with Snapper lawn mowers. It is generally used to secure wheel brackets to the deck. It is designed with a square area under bolts head which allows it to stay in place while the lock nut (sold separately) is being tightened. Please note this bolt is sold individually.

Switch-push button (normaly open)

Spring seat switch