8264 Snow Blower - Parts

Designed to fit inside the lock nut so both parts can be tightened, this Flat Head Carriage Bolt is not part of a kit or assembly and is sold individually. It is approximately 1/2 an inch long, made of metal, is silver, and is used for various applications on a variety of equipment. This part will need to be replaced if the threads are ...Read morestripped or worn, or if it no longer can hold the parts together tightly. You will need a wrench or socket set and a torque wrench to complete this repair. Customers rate this repair as Easy.

The air valve attaches to the wheel and is made of a durable material. This is a genuine MTD, Ryobi, Yard Machines, Bolens, Troy-Bilt, and Yard Man part sourced directly from the manufacturer for use in chippers, shredders, cultivators, edgers, lawn tractors, snowblowers, and trimmers. Keep in mind that this part is sold individually. Whe...Read moren replacing this item a set of pliers might be required during the installation process. It might wear out over time and will need replacing.

It is an authentic OEM sourced item which is specially produced for use with Snapper snowblowers. The discharge chute deflector is made of a durable material. A socket set might be necessary during the installation of this part. It may become broken and will need to be replaced. This item is available as an individual replacement part.

This is an authentic manufacturer-sourced part which is made for use with Murray, Snapper and simplicity lawnmowers and snowblowers. It is an important component of the variable speed function. If the part is missing or is damaged, it will provide an identical replacement for the original driven disc that was installed on a new unit. Note...Read more, this high-quality part is made of durable metal with rubber and is sold as an individual component. Refer to the appropriate diagrams and the owner's manual for your model to ensure the correct repair procedure. A wrench set will be needed to replace this driven disc.

This is a genuine OEM lube fitting part made for use with various outdoor lawn equipment models and measures 3/16-inch wide. Sold as an individual part, this grease/lube fitting is made of metal and is used to deliver lubrication to whatever it is attached to for better performance, through a small passage in the fitting. If your lube fit...Read moreting needs to be replaced, it may require pliers and a hex wrench for that process. Check your user manual or any diagrams to make sure this is the correct part for your equipment.

This replacement ball bearing is an authentic OEM component which is designed for use with Murray and Snapper lawn and garden equipment. Bearings are utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. S...Read moreymptoms of failing bearing may include squealing, screeching, and an entirely new type of "grinding" (usually heard or felt as the motor powers-down). This high-quality component is made of durable metal and is sold as an individual part. A wrench set will be needed to perform this repair. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.

This part is sold by color. Please see color options below to see what part number you need to order. Color: Majestic Orange. Part Number: 790-00121-0606. Color: Powder Black. Part Number: 790-00121-0637. Color: MTD/Troy-Bilt Red. Part Number: 790-00121-0638. Color: Red Metallic. Part Number: 790-00121-0650. Color: Oyster Gray. Part ...Read moreNumber: 790-00121-0662. Color: Polo Green. Part Number: 790-00121-0689. Color: Black Jack. Part Number: 790-00121-0691. Color: Mastercraft Green. Part Number: 790-00121-0709. Color: Sears Red. Part Number: 790-00121-4044. Color: Cub Yellow-2. Part Number: 790-00121-4021. Color: Fint Mica. Part Number: 790-00121-4033. Color: Pure Orange. Part Number: 790-00121-4041.

This is a genuine OEM supplied replacement belt which is specially produced for use with Snapper snowthrowers. It is one of the belts that are utilized to drive the augers, over time the material may wear out and stretch eventually requiring a replacement. Keep in mind this high-quality item is made of durable rubber and is sold individua...Read morelly. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.

It is an authentic replacement part that is supplied by original equipment manufacturer, it is specially designed for use with snowblowers. This is the cover for the belt to protect it and the pulleys from dirt and debris. It is made from durable, high-quality plastic material and it is sold individually.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This authentic OEM hi-pro key, also called a woodruff key or key stock, is a metal component found in your lawn equipment that connects rotating parts. It is 3/16 inch wide and 5/8 inch long. It fits into a specially-shaped slot on a shaft and prevents the parts from moving or slipping out of position while your machine is running. To fin...Read mored and replace a hi-pro key on your machine, check your user guide for instructions. When removing the hi-pro key, insert a flathead screwdriver or needle-nose pliers into its groove and pry it out of its slot. Please bear in mind that this hi-pro key is sold individually.