8263 Snapper Snow Blower - Parts

Designed to fit inside the lock nut so both parts can be tightened, this Flat Head Carriage Bolt is not part of a kit or assembly and is sold individually. It is approximately 1/2 an inch long, made of metal, is silver, and is used for various applications on a variety of equipment. This part will need to be replaced if the threads are ...Read morestripped or worn, or if it no longer can hold the parts together tightly. You will need a wrench or socket set and a torque wrench to complete this repair. Customers rate this repair as Easy.

It is an authentic OEM sourced item which is specially produced for use with Snapper snowblowers. The discharge chute deflector is made of a durable material. A socket set might be necessary during the installation of this part. It may become broken and will need to be replaced. This item is available as an individual replacement part.

This is an authentic manufacturer-sourced part which is made for use with Murray, Snapper and simplicity lawnmowers and snowblowers. It is an important component of the variable speed function. If the part is missing or is damaged, it will provide an identical replacement for the original driven disc that was installed on a new unit. Note...Read more, this high-quality part is made of durable metal with rubber and is sold as an individual component. Refer to the appropriate diagrams and the owner's manual for your model to ensure the correct repair procedure. A wrench set will be needed to replace this driven disc.

This replacement ball bearing is an authentic OEM component which is designed for use with Murray and Snapper lawn and garden equipment. Bearings are utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. S...Read moreymptoms of failing bearing may include squealing, screeching, and an entirely new type of "grinding" (usually heard or felt as the motor powers-down). This high-quality component is made of durable metal and is sold as an individual part. A wrench set will be needed to perform this repair. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.

This is a genuine OEM supplied replacement belt which is specially produced for use with Snapper snowthrowers. It is one of the belts that are utilized to drive the augers, over time the material may wear out and stretch eventually requiring a replacement. Keep in mind this high-quality item is made of durable rubber and is sold individua...Read morelly. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

This is an authentic manufacturer-sourced replacement belt. It is specially designed for use with Ariens snowblowers. This is the traction belt that helps to drive the unit. Over time rubber belts tend to wear out and stretch eventually requiring replacements. When replacing this belt, make sure to clean off the drive pulleys to prolong t...Read morehe life of the new belt. This part is made of high-quality rubber material and is sold as an individual component. Check the owner's manual for your equipment to ensure the correct repair procedure. A wrench set and a screwdriver might be needed to perform this repair.

This is an authentic manufacturer-sourced part which is specially designed for Snapper lawn and garden equipment. It is an identical replacement for a missing or faulty blower belt that was installed on a new unit. Unfortunately, over time the material will wear out and it may begin to crack and stretch eventually requiring a replacement ...Read moreto maintain peak performance. Keep in mind this high-quality belt is made of durable rubber and is sold individually.

This authentic manufacturer-approved replacement bolt is specially made for use with Snapper snowthrowers. The bolt is a safety feature on your unit. If the auger gets jammed, the way this shear bolt is designed, it would break in order to prevent further damage to the unit. Unfortunately, over time it may wear out, get damaged or lost ev...Read moreentually requiring a replacement. Keep in mind this high-quality hardware is made of durable metal and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.

Keep in mind that this high-quality part is priced individually. The traction belt goes around the drive plate. A socket set and a wrench set might be helpful during the installation of this part. It will need to be replaced if it becomes stretched or broken. This is an authentic part from Snapper for use in snow throwers.