My Orders
822S Briggs and Stratton Snow Blower - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Scraper bar and flight worn past wear limit.
9 of 10 people
found this instruction helpful.
-
Duane from RICHFIELD, MN
- Really Easy
- 30 - 60 mins
Removed scraper bar and support. Removed flight paddles. Several retaining screws were seized requiring WD-40 and vice grips for removal. Torx sockets stripped out due to threads being seized. Hex head cap screws would be better for both scraper bar and flight papples.once the screws were removed I used a tap to clean the threads and appl
... Read more
ied lubricant to minimize future corrosion. Three of the four lock nuts for the scraper bar were either not included or lost in shipping due to poor packing requiring me to purchase replacements.
Overall, the job took longer than it should have due to the additional time required to remove seized screws and acquire replacement lock nuts.
Overall, the job took longer than it should have due to the additional time required to remove seized screws and acquire replacement lock nuts.
Read less
Was this helpful?
Thank you for voting!
wetn wele except having to go get a star driver to get old one off.. treplacmetn parts werre all allen wrench so went well
1 of 4 people
found this instruction helpful.
-
John from BOUNTIFUL, UT
- Very Easy
- 15 - 30 mins
-
Wrench (Adjustable)
Star wrenched off old blades.. removed scraper with Allen's and adjustable wrench. replaced scraper first then attached the blades and tightened.. Whalla.. done ready for another foot or snow removal same day.
Was this helpful?
Thank you for voting!