My Orders
8138 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lamp cover broke
2 of 2 people
found this instruction helpful.
-
Lorraine from SEQUIM, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Unscrew the screw, remove old part, place in new part, replace screw and you are done.
Was this helpful?
Thank you for voting!
I would turn on the dryer it would run for about 10-20 seconds and then shutoff, and could smell something burning
3 of 5 people
found this instruction helpful.
-
Kevin from MASHPEE, MA
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set, Wrench (Adjustable)
There’s all sorts of videos on it I watched. It was actually very simple
Was this helpful?
Thank you for voting!
Locker assembly broke
2 of 2 people
found this instruction helpful.
-
temeaco from TULSA, OK
- Very Easy
- Less than 15 mins
-
Screw drivers
Just unscrewed the original lock and screwed the new one on it was very easy
Was this helpful?
Thank you for voting!
Manual Defrost-Extreme heat caused ice build-up
3 of 5 people
found this instruction helpful.
-
Barbara from Shaker Heights, OH
- Really Easy
- Less than 15 mins
Defrosted freezer, hose broke due to dry-rot. Used towels to let water drain into pan. Now with the plug minimal frost build-up. No ice at all. Now if I could get a new hose to drain the water that would be great.
Was this helpful?
Thank you for voting!
NO light
2 of 2 people
found this instruction helpful.
-
Dan from Leesburg, FL
- Easy
- Less than 15 mins
-
Screw drivers
.Thank You Dan
Was this helpful?
Thank you for voting!
Cracked lint filter
2 of 3 people
found this instruction helpful.
-
Richard from MADISON, AL
- Very Easy
- Less than 15 mins
Simple replacement
Was this helpful?
Thank you for voting!
Light bulb in dryer burndt
4 of 9 people
found this instruction helpful.
-
Duane from TROY, TX
- Really Easy
- 30 - 60 mins
-
Screw drivers
Removed cover replaced bulb
Was this helpful?
Thank you for voting!
Dryer was making a terrible sound.
2 of 3 people
found this instruction helpful.
-
NANCY from ATASCADERO, CA
- Really Easy
- 30 - 60 mins
An appliance repairman determined the problem which was that it needed new pulleys and thankfully PartSelect carried them. He installed them in an hour and my dryer runs fine now.
Was this helpful?
Thank you for voting!
CHANGED OUT MOTOR
1 person
found this instruction helpful.
-
Omar from SILVER CITY, NM
- Very Easy
- 30 - 60 mins
-
Screw drivers, Socket set
FIRST REMOVED THE LID ON TOP OF DRYER.THEN THE CONTROL PANEL AND THE STEAM TRAY. HAVE TO UNCLIP TWO HARNEST CONNECTORS. REMOVED THE FACE PLATE THAT HOLDS THE DRYER WALLS TOGETHER ALSO REMOVE TO SENSOR HARNESS CLIPS. .REMOVED THE BELT FROM MOTOR. TOOK DRUM OUT . UNCLIPPED MOTOR COLLAR SNAP CLIPS DISCONNECT THE MOTOR HARNESS. INSTALL NE MOT
... Read more
OR AND CONNECT HARNESS INSTALL CLIP . REINSTALL DRUM AND PUT BELT ON. CONNECT HANESSES AND INSTALL FACE PLATE. INSTALL CONTROL PANEL AND THE TOP LID.
Read less
Was this helpful?
Thank you for voting!
thermal fuse went out
1 person
found this instruction helpful.
-
Donald from Michigamme, MI
- Really Easy
- 30 - 60 mins
-
Screw drivers
Watched a repair video. Very easy to replace, about an hour to repair.
Was this helpful?
Thank you for voting!
Had an issue with the dryer not drying the clothes in the allotted time and turning the dryer off. I knew it was still getting heat so I googled the issue with suggestions.
1 person
found this instruction helpful.
-
Tim from Tavares, FL
- Really Easy
- 30 - 60 mins
-
Screw drivers
I watched a YouTube video with how to take the dryer apart and remove the sensors. I followed the what the instructions were removing the top of the dryer and then the front panel. Once that was removed it was a matter of removing 7 more screws and the lint collector piece came off. Popped the sensor pieces out. Cleaned the inside of the
... Read more
dryer and reinstalled a total of 5 parts and dryer is working fine and the clothes are drying in the allotted time it use to take.
Read less
Was this helpful?
Thank you for voting!
Loud rumbling noise
1 person
found this instruction helpful.
-
Michael from RIVERSIDE, CA
- Easy
- 30 - 60 mins
-
Screw drivers, Socket set, Wrench (Adjustable)
Followed video provided on site
Was this helpful?
Thank you for voting!
Under the microwave there are two light bulbs that light up the top of the oven/range.
1 person
found this instruction helpful.
-
Janet from TREASURE IS, FL
- Very Easy
- Less than 15 mins
-
Screw drivers
Last week I removed the glass cover that was held in by one screw and removed the burnt out light bulb. I ordered the bulb and left the glass cover off until the bulb arrived. I had to wait until this evening to put the glass cover back on and fasten the screw because I have a window right next to the oven and the sun streaming in made
... Read more
it too difficult for me to see how to put the glass back in and replace the screw.
Read less
Was this helpful?
Thank you for voting!
The dryer door would not stay closed
1 person
found this instruction helpful.
-
William from BOZEMAN, MT
- Very Easy
- Less than 15 mins
-
Screw drivers
Removed the two screws holding the dryer door strike/locker assembly in place, removed the old and put the new in its place and replaced the screws.
Was this helpful?
Thank you for voting!
bulb burned out light that is under the microwave, which lights the oven below.
1 person
found this instruction helpful.
-
Gary from UNIVERSITY PA, MD
- Really Easy
- Less than 15 mins
-
Screw drivers
thank you for the video--very clear, responsible, applicable although the illustration was not exactly of our kind of light. the bulb was exactly like the one Hotpoint used in its microwave made in 1989! I will come back to you for parts in the future. (You have the model # from my original order.)
Was this helpful?
Thank you for voting!