8089 - Parts

It is a genuine component which is supplied by the original manufacturer. The bushing is specially designed for use with Snapper and Simplicity lawn mowers. It provides a tight fit for the suspension while allowing for movement with minimum friction. If the original item is damaged or is missing, this will provide an identical replacement...Read more. This suspension bushing is made of high-quality material and is sold as an individual item. Check the diagrams for your model to ensure the correct replacement procedure.

This insulation measures 2.5" thick, 33" wide and 70" long.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This is an authentic OEM sourced component which is specially made for use with Murray and Snapper lawn and garden equipment. The part provides an identical replacement for a missing or a faulty capscrew that was installed on a new unit. It is a standard hardware which may have multiple applications, please make sure to refer to the appro...Read morepriate diagrams of your model for the correct location and application of this screw. Keep in mind this high-quality hex head capscrew is made of durable metal and is sold individually.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

This is an original replacement part sourced directly from the manufacturer. The hex nut is commonly found in Snapper lawn tractors and riding mowers. This part is made of metal, and is generally used in securing the pulley and mower blade assembly. Please be aware that there are different nuts used in the machine. Refer to the parts ...Read morediagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The hex nut is sold individually.

This high-quality OEM replacement blade is specially designed for use with Snapper lawn mowers. Mulching blades are designed to circulate the grass longer so it can be cut into smaller pieces allowing them to decompose quicker, releasing nutrients into the soil. Over time blades will wear down, become dull or they may warp eventually requ...Read moreiring replacement. This part is made from high-quality steel and is sold individually. Make sure to refer to the owner's manual for your model to ensure the correct application and repair procedure. A wrench will be needed to remove and resecure the hardware that holds the blade.

This part is available individually and is made of plastic and metal. The limit switch connects to the interlock and helps to turn off the engine if there is a problem. A wrench might be required during the replacement of this part. It will require replacing if it becomes broken. This is a Murray, Snapper, and Simplicity replacement part directly sourced from the manufacturer for use in lawn tractors.

This is a genuine part which is supplied directly from the original equipment manufacturer and is used with Craftsman lawn tractors. The solenoid support engages and routes the battery electrical supply to the engine starter when the ignition switch is turned to the start position. This part is made of hard plastic and metal, it is also s...Read moreold individually. The tools you will need for this repair are a screwdriver and socket wrench.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

The pushnut retainer goes next to the ball bearing. This is available as an individual replacement part. This item is an OEM from Snapper, Murray, and Simplicity for use in lawn mowers, lawn tractors, and snowblowers. It might require a wrench to replace this part. It is made of metal and will need to be replaced if it breaks.