8071 - Parts

Spacer 1.0 od x.640

This OEM valve stem regulates air flow in and out of tires, allowing for inflation and deflation. It features an 11.5mm outer diameter, 31.75mm total length, and 22.35mm effective length. It is a metal valve with a threaded plastic cap, housed in plastic. To determine if a valve stem is broken, you can check for signs of damage or leakage...Read more. Signs of a broken valve stem include cracks, bends, or air leakage, which should be replaced to prevent tire deflation and operational issues. To remove the valve stem, fully deflate the tire first. Then, disconnect the tire from the rim to access the inner part of the rim. You may need to unthread any securing nuts if present. Use a pair of pliers to grip at the base of the valve stem and then unscrew it from the rim hole.

This is an OEM part sourced directly from the manufacturer. The washer is commonly found in lawn mowers from Toro and Lawn Boy. This part is made of metal, and is generally used to secure and shield the connection between the plate guide and belt retainer. Please be aware that there are different washers used in the machine. Refer to ...Read morethe parts diagram to be sure of ordering the correct part. You may require a wrench when replacing this part. This item is sold individually.

This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. If broken, there may be a leak or blockage and the part should be replaced. The part may also need to be replaced according to manufacturer'...Read mores specifications, and is a manufacturer-approved part. Refer to your make, model and diagrams to ensure this part is correct.

(c) sleeve axle

This authentic component is supplied by the original equipment manufacturer. It is specially designed for use with Snapper lawn mowers. The blade is utilized to cut grass. Unfortunately, over time it may wear out, become dull or damaged eventually requiring a replacement. Make sure to refer to the owners manual of your model for the corre...Read morect installation of this part. To replace the blade you will need a wrench in order to remove and resecure the blade bolt.

This is an original replacement part manufactured for use with riding lawnmowers. The washer is commonly used to provide a wider surface area to disperse the pressure put on the blade by the bolt that is fastened to the spindle. This washer is available as an individual replacement part, please see model diagram for associative parts.

Lockwasher split 3/8

Screw hex 1/4-20x.5