80480 ((BH140G42ABV)(Series A)) Snapper Lawn Tractor - Parts

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This is an authentic replacement part manufactured for use with rear engine mowers and lawn tractors from Craftsman. The user will need to replace this hex nut if it is missing or not working correctly. This hex nut screws onto the transmission link lever. This part is made of durable material and sold individually.

This is a genuine Snapper and Simplicity replacement part for use in lawn mowers, lawn tractors, and snowblowers. The key attaches to the disc and is made of metal. A set of pliers may be needed during the replacement of this part. It will need to be replaced if it breaks. This item is sold individually.

This gas tank cap is an OEM replacement part supplied by Snapper. It is compatible with over 150 models of rear engine riders. This cap provides a cover for the gas tank in the machine. It is designed to prevent the tank from leaking gasoline. This part is made of plastic and sold individually. No tools are needed to replace this part.

This hex center lock nut is sourced from the original manufacturer for use in lawn and garden power equipment. It is a hexagon-shaped fastener for bolts/studs that is responsible for the keeping the bolt/studs secure during use. The nut is made of metal and has a diameter of 5/16 of an inch and a thread pitch of 18 internal threads per in...Read morech. Over time the threads in the nut can wear down and the nut itself may crack or break. It is important to replace it as soon as necessary to avoid damaging your equipment. Use a socket or wrench to remove the old nut and thread the new one on. Make sure to order the correct number of nuts for your equipment as each nut is sold individually.

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

This is an original replacement part sourced directly from the manufacturer. The retaining ring is commonly found in riding mowers from Snapper and Murray. This part is made of metal, and is generally used to secure the bearing in the spindle housing. Please be aware that there are different retaining rings used in the machine. Refer ...Read moreto the parts diagram to be sure of ordering the correct part. You may require pliers when replacing this item. The retaining ring is sold as an individual replacement part.

This is a genuine item that is supplied by the original equipment manufacturer for use with Murray and Snapper lawn and garden equipment. It is an identical replacement for a missing or a faulty lever that was installed on a new unit, please make sure to refer to the appropriate diagram of your model for the correct location and applicati...Read moreon of this component. This high-quality item is made of durable plastic and is sold individually, keep in mind the hardware to secure it is sold separately.

The wing-nut is made out of metal and attaches to various other parts. It is a genuine OEM sourced part which is specially designed for use with lawn tractors made by Snapper and Simplicity. This part is available as an individual replacement even though several may be needed. It will need to be replaced if it becomes broken or stripped.

It is an authentic OEM item that is designed for use with a variety of lawn and garden equipment. A washer is a special part which helps to provide a tight fit between connected components. This part provides an identical replacement for a damaged or a missing hardware that was installed on a new unit. It is a standard hardware which may ...Read morehave multiple applications. Make sure to check the appropriate diagrams for your specific model for the exact location and the correct application of this cone washer. Note, it is made of durable metal and is sold individually.

This is an authentic replacement part manufactured for use with Snapper riding lawn mowers and snowthrowers. The metal washer is commonly used to distribute pressure put on a part assembly by a nut or bolt across a wider area. This washer is used with several types of equipment and the washer's application can vary depending on the model....Read more The washer is available as an individual replacement part, please see model diagram for part location and usage.

This is a genuine manufacturer-approved component which is specially made for use with Snapper riding lawn mowers and garden tractors. The purpose of this pulley is to apply tension to the belt. It provides an identical replacement for a faulty or a missing part that was installed on a new unit. Keep in mind this high-quality pulley is ma...Read morede of durable plastic with a metal bushing. Note, this idler pulley as a single component. Refer to the appropriate diagrams of your model for the exact location and the correct installation of this part.