8048 - Parts

This replacement ignition key pair is sourced from the original equipment manufacturer. It is specially designed for use with Murray, Snapper, and Simplicity riding lawn mowers and garden tractors. This is a safety feature to prevent any unauthorized use of the mower. The key is inserted into the ignition switch allowing a user to start t...Read morehe unit. Make sure to refer to the owner's manual for your equipment to ensure the correct application. Note, this high-quality metal ignition key is sold in a pack of two.

Bolt 5/16-18x1.25 g5

This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. If broken, there may be a leak or blockage and the part should be replaced. The part may also need to be replaced according to manufacturer'...Read mores specifications, and is a manufacturer-approved part. Refer to your make, model and diagrams to ensure this part is correct.

(c) sleeve axle

This is a genuine replacement part sourced directly from the manufacturer. The screw is commonly found in lawn tractors from Murray and Snapper. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts d...Read moreiagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This authentic component is supplied by the original equipment manufacturer. It is specially designed for use with Snapper lawn mowers. The blade is utilized to cut grass. Unfortunately, over time it may wear out, become dull or damaged eventually requiring a replacement. Make sure to refer to the owners manual of your model for the corre...Read morect installation of this part. To replace the blade you will need a wrench in order to remove and resecure the blade bolt.

This is a genuine Snapper and Simplicity part for use with Snow Blowers. The bail control arm is a safety device that you pull against the handle to start the auger. When the bail arm is released, the auger stops rotating. The most common reason for replacing the bail arm is if it is bent or broken, causing the augers to not engage. This ...Read morepart is sold individually. There are no tools needed to replace the bail control arm.

This is an OEM part sourced directly from the manufacturer. The screw is commonly found on Snapper lawn mowers, trimmers, and snowblowers. This part is made of metal, and is generally used to secure the upper handle to the lower handle. Please be aware that there are different screws used in the machine. Refer to the parts diagram to ...Read morebe sure of ordering the correct part. No tools are required when replacing this item. Simply unscrew the knob so you can remove the old part, then slot the new one into place. This item is sold individually.

Tire&rim 7x1.50

This is an original replacement part manufactured for use with riding lawnmowers. The washer is commonly used to provide a wider surface area to disperse the pressure put on the blade by the bolt that is fastened to the spindle. This washer is available as an individual replacement part, please see model diagram for associative parts.

This is an original Snapper replacement part manufactured for use with rear engine riding lawnmowers. The special aluminum spacer is used to secure the gage wheel. The spacer is hollow, and supports the bolt that goes through the wheel to secure it to the deck. The spacer is sold individually.