My Orders
8041 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave would not heat food, but everything else worked.
-
Samuel from Daleville, VA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Problem was a faulty door latch switch. I easily accessed the switch by removing the control panel, total of 4 screws. After that, just disconnected the three switch door latch assembly and connected the new one. Took about half an hour and was very easy. Unit works perfectly now.
Was this helpful?
Thank you for voting!
Microwave Door Handle Busted Off (At Top Of Handle)
-
Todd from Parker, CO
- Really Easy
- 15 - 30 mins
-
Screw drivers
Easy as 1-2-3! Removed door from unit (top right hinge has an easy small lock that simply "snaps out" with a standard screwdriver. Placed door face down on table. Removed outer (perimeter) frame with standard screw driver, by plying up. Removed the two screws (to the handle) from the backside of door with a phillips screwdriver. Repla
... Read more
ced with the new door handle and repeated the above steps in reverse. Done.
Read less
Was this helpful?
Thank you for voting!
No Heat
-
Dennis from Chesapeake, VA
- Really Easy
- 15 - 30 mins
-
Screw drivers
1. Removed unit from the cabinet. (2 screws). 2. Remove the outer microwave metal shell. (10 screws). 3. Locate and remove part. (3 screws). 4. Install new part and replace all screws. 5. Install unit back into cabinet. So easy. I will share this site with all of my friends.
Was this helpful?
Thank you for voting!