80397 ((ELT140H331KV)(Series 1)) Snapper Lawn Tractor - Parts

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This part is priced as an individual replacement even though two may be needed. The flange ball bearing attaches to the front wheel, one on each side. It is made of metal and may require a set of pliers during replacement if this part breaks. This is a genuine Snapper replacement part that is sourced from the original manufacturer for use with rear engine rider mowers.

This genuine manufacturer-sourced replacement part is specially designed for use with Snapper riding lawn mowers. A locknut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which has multiple applications, please refer to the appropriate diagrams of your model for the correct location a...Read morend use of this part. Keep in mind this durable metal component is sold individually.

This manufacturer-sourced replacement washer is specially produced for use with Murray and Snapper lawn mowers. It helps to distribute the pressure evenly to secure two connected parts. This is a standard hardware which has multiple applications depending on the model of your equipment, please make sure to check appropriate diagrams for ...Read morecorrect location and use of this hardware. This part is made of durable plastic material and it is sold individually.

This is a plastic replacement part made for Snapper and Murray machinery. It is made by the original manufacturer. This type of bearing is used to separate parts to reduce friction and wear on those parts. Therefore, this is a common and easy repair.

This is a genuine manufacturer-approved component which is specially designed for use with Snapper lawn mowers. It is an identical replacement for a missing or damaged idler pulley that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of th...Read moreis part. Keep in mind this high-quality item is made of durable metal and is sold individually.

It is a genuine item that is supplied by the original equipment manufacturer for use with Snapper riding lawn mowers and garden tractors. The purpose of this gage wheel is to support the deck allowing for easy transportation. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. This hi...Read moregh-quality wheel is made of durable rubber and is sold individually, keep in mind the hardware to secure it is sold separately. Please make sure to check the diagrams of your model for the correct location and application of this part.

This part is available individually and is made of plastic and metal. The limit switch connects to the interlock and helps to turn off the engine if there is a problem. A wrench might be required during the replacement of this part. It will require replacing if it becomes broken. This is a Murray, Snapper, and Simplicity replacement part directly sourced from the manufacturer for use in lawn tractors.

Roll pin 1/4x1-1/4

This is a genuine part which is supplied directly from the original equipment manufacturer and is used with Craftsman lawn tractors. The solenoid support engages and routes the battery electrical supply to the engine starter when the ignition switch is turned to the start position. This part is made of hard plastic and metal, it is also s...Read moreold individually. The tools you will need for this repair are a screwdriver and socket wrench.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This is an authentic replacement part manufactured for use with rear engine mowers and lawn tractors from Craftsman. The user will need to replace this hex nut if it is missing or not working correctly. This hex nut screws onto the transmission link lever. This part is made of durable material and sold individually.