8008 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave door did not close
46 of 70 people
found this instruction helpful.
-
Rozsa from MADISON, NJ
- Easy
- 30 - 60 mins
Initially I called a Samsung recommended appliance repair outfit to fix the latch. The technician informed me that he does not fix latches. I need to buy a full new door for the microwave for $215 plus he charges $165 to come to my house. I got angry and did some research and it turned out that this is a very common problem. I ordered par
... Read more
t PS4229162 "door key" $6.67 then followed the instructions on a youtube video by zimsjeep
"Repair a Broken Microwave Door Latch" to install. At first I struggled a bit hooking up the spring to the frame, but then I used a slim plier to hold the spring (instead of my fingers) and that did the trick.
"Repair a Broken Microwave Door Latch" to install. At first I struggled a bit hooking up the spring to the frame, but then I used a slim plier to hold the spring (instead of my fingers) and that did the trick.
Read less
Was this helpful?
Thank you for voting!
Not the original type bulb
31 of 40 people
found this instruction helpful.
-
John from Orlando, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
The repair was very easy, however the bulb was not the same as the original one. The original bulb had a bright setting and a low setting, but the replacement bulb was only the low setting bulb. There was no bright and dim operation. The switch on the microwave had the duel settings.
Was this helpful?
Thank you for voting!
Buzzing noise, no heating of food
22 of 35 people
found this instruction helpful.
-
Ted from Hudson, NH
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Removed control panel, discharged HV capacitor. Removed old diode, tested to confirm failure. Replaced part. Other than the removal of the panel swapping the part was almost as easy as replacing a light bulb.
Was this helpful?
Thank you for voting!
DOA
12 of 18 people
found this instruction helpful.
-
Le from BIGGSVILLE, IL
- Really Easy
- 30 - 60 mins
-
Screw drivers
Did shorts test on motor, continuity tests on switch and rectifier. Found dead rectifier, ordered same, Installed Now OK
Was this helpful?
Thank you for voting!
Microwave stopped working - would not heat up
11 of 21 people
found this instruction helpful.
-
louis from PARRISH, FL
- Easy
- 1- 2 hours
-
Pliers, Screw drivers
I removed the outer cover and exposed the inner workings. I watched a video on partselect.com to show how to remove and replace the Diode. I followed the instructions and it was very easy to replace.
Unfortunately, the diode was only part of the issue. I ended up replacing the High Voltage capacitor and Magnetron also. Those w ... Read more ere a little more complicated but still easy to do.
Now the Microwave works just like new! Cost me less than $100 for all parts.
Unfortunately, the diode was only part of the issue. I ended up replacing the High Voltage capacitor and Magnetron also. Those w ... Read more ere a little more complicated but still easy to do.
Now the Microwave works just like new! Cost me less than $100 for all parts.
Read less
Was this helpful?
Thank you for voting!
Appears to work, but food not heated
20 of 48 people
found this instruction helpful.
-
Joel from CAMBRIDGE, MA
- Difficult
- 1- 2 hours
The high voltage tired was shorted. I replaced it with a new one, but that did not solve the problem.
You can test the high voltage tired with a voltmeter and a 9 V battery. Search Search for it on YouTube.
You can also test the high voltage capacitor, the high-voltage transformer, and the magnetron with a multi met ... Read more er. Search for the procedures on YouTube.
I tested all these high-voltage components with a low-voltage multi meter, and they all checked out OK (after replacing the diode). However the microwave still did not heat food.
When working on a microwave it is important to unplug it and also discharge the high voltage capacitor. The capacitor has a 10 megaohm resister to automatically discharge itself, but it may have failed – – so discharge it manually.
In the end I ordered a new microwave.
You can test the high voltage tired with a voltmeter and a 9 V battery. Search Search for it on YouTube.
You can also test the high voltage capacitor, the high-voltage transformer, and the magnetron with a multi met ... Read more er. Search for the procedures on YouTube.
I tested all these high-voltage components with a low-voltage multi meter, and they all checked out OK (after replacing the diode). However the microwave still did not heat food.
When working on a microwave it is important to unplug it and also discharge the high voltage capacitor. The capacitor has a 10 megaohm resister to automatically discharge itself, but it may have failed – – so discharge it manually.
In the end I ordered a new microwave.
Read less
Was this helpful?
Thank you for voting!
Microwave would keep running when door was open
4 of 6 people
found this instruction helpful.
-
Todd from GOSHEN, IN
- Really Easy
- 30 - 60 mins
-
Screw drivers
Searched for a YouTube video that included “replace Samsung microwave body latch” (whatever part name). There are plenty of easy how-tos.
Was this helpful?
Thank you for voting!
Microwave lamp burnt out
9 of 22 people
found this instruction helpful.
-
Kenneth from Millersville, MD
- Easy
- Less than 15 mins
-
Screw drivers
With microwave still attached under the cabinets, I removed 2 screws for the top grill and then one screw for the bulb cover plate. This provided access to the bulb. The replacement bulb was a simple plug-in.
The best part of this experience was the exploded parts diagram on the PartsSelect web site which allowed me to easily ... Read more locate and order the correct part.
The best part of this experience was the exploded parts diagram on the PartsSelect web site which allowed me to easily ... Read more locate and order the correct part.
Read less
Was this helpful?
Thank you for voting!
Burned out lamp on microwave
5 of 10 people
found this instruction helpful.
-
Ellen from Colorado Springs, CO
- Really Easy
- Less than 15 mins
-
Screw drivers
Opened light panel and replaced bulb. Very, very easy.
I am concerned, however, that this bulb does not emit the same amount of light as the one i replaced. The item number is the same, however, so I am perplexed at this bulb efficiency.
I am concerned, however, that this bulb does not emit the same amount of light as the one i replaced. The item number is the same, however, so I am perplexed at this bulb efficiency.
Was this helpful?
Thank you for voting!
Burned out light bulb
4 of 8 people
found this instruction helpful.
-
Jon from Adel, IA
- Really Easy
- Less than 15 mins
-
Screw drivers
I followed the instructions in the owners' manual on how to access the bulb. Installation was a breeze. I couldn't believe how fast I received the replacement bulb from PartSelect. I ordered it on line one afternoon and Fedex delivered it to my front door before 9:00 A.M. the next day. Awesome service.
Was this helpful?
Thank you for voting!
VERY dirty- grease soaked- filters from under the above the stove microwave.
4 of 8 people
found this instruction helpful.
-
Suzanne from LONG BEACH, CA
- Very Easy
- Less than 15 mins
-
Pliers
Pulled the filters down, measured and went on line- done. was fast to find the part and easy to order...
Was this helpful?
Thank you for voting!
Missing carousel plate
3 of 5 people
found this instruction helpful.
-
Diane from Paso Robles, CA
- Really Easy
- Less than 15 mins
Ordered (most difficult part of repair, because I wasn't sure the one I ordered would fit), opened box, removed padding, opened microwave oven door, lined up center indentations with center and my repair was complete. Placed a cup of lukewarm coffee on the tray, closed door and pushed auto 30 seconds. The cup went round and round on the p
... Read more
late that went round and round and then, the END chime sounded. Success! Lukewarm coffee has been transformed to HOT coffee on the newly installed cooking tray.
Read less
Was this helpful?
Thank you for voting!
filter on microwave
2 of 2 people
found this instruction helpful.
-
kenny from Blytheville, AR
- Very Easy
- Less than 15 mins
easy to install
Was this helpful?
Thank you for voting!
WHEN I CLOSED DOOR IT WOULD HUMM
3 of 5 people
found this instruction helpful.
-
ROBERT from GLEN BURNIE, MD
- Easy
- 15 - 30 mins
REPLACED DOOR SWITCH ASSEMLY
Was this helpful?
Thank you for voting!
Received Broken Part
2 of 2 people
found this instruction helpful.
-
David from BENTON CITY, WA
- Very Easy
- 30 - 60 mins
This is the 2nd broken part that I have received in 2 weeks. You cant install something that is broken. I spoke with customer service and advised that they not send the part in a soft pouch.
Was this helpful?
Thank you for voting!