79759 (AWBCSER) LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door light switch, 3rd one I have replaced in 6 years made in China.
1 person
found this instruction helpful.
-
Charles from CURWENSVILLE, PA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Easy install, small screwdriver under back of old switch push out and pull out with small pliers. unsnap the old plug and install new. YOUR DONE
Was this helpful?
Thank you for voting!
Replace switch
1 person
found this instruction helpful.
-
Dean from HILLSDALE, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Read previous tips
Taped off area around switch to protect surface
Used putty knife to extract switch
Used screwdriver to separate connector from switch
Plugged in connector
Pushed switch assembly into opening
Removed tape
Taped off area around switch to protect surface
Used putty knife to extract switch
Used screwdriver to separate connector from switch
Plugged in connector
Pushed switch assembly into opening
Removed tape
Was this helpful?
Thank you for voting!
the light did not work when door was opened. At first it would flicker then off completely.
1 of 2 people
found this instruction helpful.
-
Alma from Winterport, ME
- Very Easy
- Less than 15 mins
-
Screw drivers
My son just pried out the old switch with a screw driver snapped out the old one and snapped in the new one. Pretty sure even I could have done this. Very quick and easy. Thanks. :-)
Was this helpful?
Thank you for voting!
Replace the light switch for the refrigerator
1 of 2 people
found this instruction helpful.
-
Karyn from DURHAM, NH
- Really Easy
- Less than 15 mins
Cover the putty knife with tape so you do not scratch the side wall where the switch is located. Slide the knife under the edge of the switch and push in a bit towards the switch and slightly twist to pop the switch out of its hole. Disconnect the wires from the switch and simply plug in the new switch. Push wiring back into the hole and
... Read more
careful push the switch into the hole until it snaps into place.
Read less
Was this helpful?
Thank you for voting!
Left door when opened the light wouldn’t come on. Checked the light, ok. Ordered push button switch
1 of 2 people
found this instruction helpful.
-
Richard from TULLY, NY
- Really Easy
- Less than 15 mins
-
Screw drivers, Wrench (Adjustable)
Removed the cover 2 screws
Squeezed the 2 side sleeves and removed
Snapped in new button, replaced the cover. Done
Squeezed the 2 side sleeves and removed
Snapped in new button, replaced the cover. Done
Was this helpful?
Thank you for voting!
Ice Maker and Water dispenser stopped working
1 of 2 people
found this instruction helpful.
-
Donald from BETHPAGE, NY
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Pulled the fridge out.
Unscrewed the back cover and the one screw holding the value assemble.
undid the 2 hoses and replaced the part.
Super SImple/
Unscrewed the back cover and the one screw holding the value assemble.
undid the 2 hoses and replaced the part.
Super SImple/
Was this helpful?
Thank you for voting!
Lower ice maker water feed froze and caused leak. Needed new water valve.
2 of 5 people
found this instruction helpful.
-
Thomas from YORKTOWN, VA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Took pics of original install, removed old valve, water tubes & plugs. Installed new valve, reconnected electronic plugs, water tubes, turned water back on and all has been well since. Thank you for your timely delivery!
Was this helpful?
Thank you for voting!
Right door cam broken
1 of 2 people
found this instruction helpful.
-
Gary from Goose Creek, SC
- Easy
- 30 - 60 mins
-
Screw drivers
Remove door seal and cam shaft (one piece). Remove broken cam by removing Philips head screw. Replace broken cam with new cam and reassemble. The actual repair took about 15 minutes however the majority of time was spent figuring out that the door seal and cam shaft had to be removed, no tools required.
Other Parts Used:
Was this helpful?
Thank you for voting!
Cold water control rusty and leaking water
2 of 6 people
found this instruction helpful.
-
Homer from MARION, VA
- Really Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
Removed old part very easily and installed the new part without any problems. Used and adjustable wrench and screwdriver
Was this helpful?
Thank you for voting!
Replace water valve
1 of 3 people
found this instruction helpful.
-
Gary from Sanford, FL
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
I waited for 2 weeks for a professional appliance repairman to fix my water leak. He kept telling me he was trying to get the part. I finally gave up on him and ordered the part online. Only took a few minutes for the repair. Got the part via mail in 3 days.
Was this helpful?
Thank you for voting!
Slow water for drinking
1 of 3 people
found this instruction helpful.
-
Steven from SEBASTIAN, FL
- Easy
- 15 - 30 mins
-
Screw drivers, Wrench set
Just like on YouTube very easy to do
Was this helpful?
Thank you for voting!
The water filter needed to be replaced.
1 of 3 people
found this instruction helpful.
-
Alice from Wimberley, TX
- Really Easy
- Less than 15 mins
I screwed the old one out and replaced it with the new one. A no-brainer. The thing that was so amazing was that I ordered the filter on the intrnet and it arrived the very next day!!! I was very surprised and pleased with the very quick shipping!!!
Was this helpful?
Thank you for voting!
Refrigerator light had a short in it and would randomly work
1 of 3 people
found this instruction helpful.
-
Tammy from HAGERSTOWN, MD
- Very Easy
- Less than 15 mins
-
Screw drivers
Unplugged the fridge. Used a screwdriver to loosen the switch. Easy to disconnect from fridge and just plugged the new switch in. Popped right back into the side of the fridge and worked perfectly.
Was this helpful?
Thank you for voting!
broken plastic pieces of material in ice tray
1 of 3 people
found this instruction helpful.
-
John from TACOMA, WA
- Very Easy
- Less than 15 mins
Removed Ice dispenser and installed new one.
Was this helpful?
Thank you for voting!
Valve assembly leaked
2 of 6 people
found this instruction helpful.
-
Richard from TORRANCE, CA
- Very Difficult
- More than 2 hours
The assembly sent is different than what is on the unit. The connectors do not match. We called and it seems you don’t have the correct part. The only part we have found will only connect the ice maker or the water. It will be a shame if I have to buy a new refrigerator.
Was this helpful?
Thank you for voting!