79754 (ABI2SER) LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice crystals appearing on the face of the freezer draws
2 of 2 people
found this instruction helpful.
-
Craig from SPRING HILL, FL
- Really Easy
- Less than 15 mins
Part Select had a great video which made the repair easy, using a putty knife to start removing the freeze door gasket. Once removed the install is simple just snap the new gasket into the track, but start at the corner. Other company's have a video requiring you to remove the entire freezer compartment out of the appliance, unnecessary w
... Read more
aste of time and labor.
Read less
Was this helpful?
Thank you for voting!
LED’s we’re not working only 2 we’re lit
2 of 3 people
found this instruction helpful.
-
Alan from MADISON, ME
- Very Easy
- Less than 15 mins
-
Screw drivers
Remove 2 screws swing light down a little bit and pull it to front unplug wires . The hard part of job was finding new replacement light, Partselect.com was only sight I could find that had new replacement number and had the light . Other sites including LG site would only tell me the part number on old lights was discontinued 2 of sites
... Read more
said try used appliance dealers
Read less
Was this helpful?
Thank you for voting!
replace refrigerator ice bin because old bin would not dispense ice.
1 person
found this instruction helpful.
-
Kathy from PORTER, TX
- Very Easy
- Less than 15 mins
Slid new bin into place. It works perfectly now.
Was this helpful?
Thank you for voting!
Plastic bracket holding freezer drawer broke off
1 person
found this instruction helpful.
-
Terry from Broken Arrow, OK
- Very Easy
- Less than 15 mins
-
Screw drivers
Removed upper drawer/basket from freezer
Removed 2 Philips screws
Removed rail bracket assembly
Reinstalled reversing those steps
Works like new.
Happy wife. Happy life. FYI- I am nearly 77 yrs young.
Removed 2 Philips screws
Removed rail bracket assembly
Reinstalled reversing those steps
Works like new.
Happy wife. Happy life. FYI- I am nearly 77 yrs young.
Was this helpful?
Thank you for voting!
Door Stopper had snapped off
1 person
found this instruction helpful.
-
Lawrence from FALL RIVER, MA
- Very Easy
- Less than 15 mins
-
Screw drivers
Unscrewed what remained from broken door stop, aligned new one, screwed it in. Done!
Was this helpful?
Thank you for voting!
rail that holds meat tray broken
1 person
found this instruction helpful.
-
Steve from GEORGE WEST, TX
- Very Easy
- Less than 15 mins
-
Screw drivers
remove all trays from refrigerator , remove screw holding rail and install new rail.
Was this helpful?
Thank you for voting!
Broken Fan motor
1 person
found this instruction helpful.
-
Dana from Lakeside, AZ
- Really Easy
- 15 - 30 mins
-
Screw drivers
took out original Duct Assembly, put in NEW Duct Assembly the same way the original Duct Assembly was removed in the freezer. The rest was easy to put back together
Was this helpful?
Thank you for voting!
Freezer door gasket formed gaps between door and refrigerator.
1 person
found this instruction helpful.
-
Cheryl from Ormond Beach, FL
- Really Easy
- 15 - 30 mins
Removed old gasket from the door and replaced with new gasket.
Was this helpful?
Thank you for voting!
Broken freezer rail.
1 person
found this instruction helpful.
-
John from STEPHENVILLE, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
Took out tray , removed 2 screws, removed old rail and installed new one.
Was this helpful?
Thank you for voting!
Broken plastic/glass
1 person
found this instruction helpful.
-
Bill from MURRIETA, CA
- Very Easy
- Less than 15 mins
Now that you have to buy a complete assembly that includes the drawer in the classy window it's very simple to replace however you buying parts that you don't need simply because G no longer makes the window. Which I find rather odd being as though that they make the whole assembly think and sell windows by themselves for less than 2/3 of
... Read more
what I spent through the whole assembly
Read less
Was this helpful?
Thank you for voting!
The plastic cover on the butter area had broken.
1 person
found this instruction helpful.
-
Elizabeth from TALLAHASSEE, FL
- Really Easy
- Less than 15 mins
Just had to slip the 2 pegs into the existing holes.
Was this helpful?
Thank you for voting!
Freezer door gasket needed replacing.
1 person
found this instruction helpful.
-
Stephen from DICKINSON, TX
- Really Easy
- Less than 15 mins
-
Pliers
Simply removed old gasket. Started in a corner with installing the new gasket. It went in easily and quickly.
Was this helpful?
Thank you for voting!
Butter bin door had broken
1 person
found this instruction helpful.
-
Mary from DEL MAR, CA
- Really Easy
- Less than 15 mins
Simple replace of door, fits perfectly
Was this helpful?
Thank you for voting!
the ice bin was extremely easy to set in....no explanation necessary however, The customer service left a lot to be desired!
1 person
found this instruction helpful.
-
Charles from CHATTANOOGA, TN
- Really Easy
- 30 - 60 mins
The ice bin I ordered did not arrive on time and, when tracking indicated it was delivered, it was not here. I notified customer service and was told that they would cancel that order and I could order again.and make a payment, to include shipping, again and I would be reimbursed. Two days later the first order showed up. I notified cu
... Read more
stomer service that the item had shown up and I installed it therfore requested the second order be deleted. Was told that it was already enroute and they would send me necessary paperwork to return it. upon receipt of the paperwork I followed the instructions bur, when I contacted UPS (as directed) was advised that I would have to pay shipping of about $19. unless Partselect requested and paid for shipping and sent me the shipping label. I received the shipping label but, when I contacted UPS was advised that I would stoll have to pay to have the item picked up at my house and, unless I wanted to pay that cost I should deliver the package to a UPS pick up location........all the way across town through heavy traffic, about 25 miles. I should have kept the second bin along with the first, given it away or thrown it away and the cost would have been re imbursed. Trying to do the right thing, I was responsible for additional cost and aggravation .......Thanks a lot!!!!
Read less
Was this helpful?
Thank you for voting!
Water dispenser not working
1 person
found this instruction helpful.
-
Michael from BRAINTREE, MA
- Really Easy
- 30 - 60 mins
Removed back panel and water inlet valve and replaced with a new water inlet valve
Was this helpful?
Thank you for voting!