EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79681983410 Kenmore Dryer - Parts

1 - 12 of 83

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
4 PACK ROLLER ASSEMBLY – Part Number: 4581EL2002L
$144.76
In Stock
4 PACK ROLLER ASSEMBLY
★★★★★
★★★★★
(82)
Part #4581EL2002L
This part is sold individually. The drum support roller is found in your dryer. It is used to hold the drum in place in the cabinet while letting the drum rotate on the support rollers. It is recommended that you replace both rollers at once. You may notice that this part needs to be replaced if you are experiencing a squeaking noise, which could be due to the bearing going bad. The bearing could be severely damaged if you hear a very loud thumping noise, much like you would when you are drying a pair of shoes.
Thermal Fuse – Part Number: 6931EL3003D
$19.75
In Stock
Thermal Fuse
★★★★★
★★★★★
(28)
Part #6931EL3003D
This thermal fuse acts as a high-limit thermostat, and shuts off the heating element when the dryer overheats by cutting off power to the dryer. If the thermal fuse has blown, the dryer will not start. These fuses cannot be reset, so if yours has blown, you will need to replace it. A common reason for the thermal fuse to blow on a dryer is if the exhaust vent on your dryer is restricted or blocked. Hot air will be confined in the dryer and the fuse will trip and stop the electricity from flowing to the gas valve or heating element.
Blower Thermostat – Part Number: 6931EL3002M
$53.85
In Stock
Blower Thermostat
★★★★★
★★★★★
(8)
Part #6931EL3002M
Monitor exhaust air temperature with this dryer blower housing thermostat. Mounted on the blower assembly, it responds to heat and opens its electrical circuit when the temperature reaches its set limit, helping protect the dryer from overheating. A failed thermostat may interrupt operation, leaving the dryer unable to start or heat properly. Replacing a faulty thermostat helps restore the temperature safety circuit. Unplug the dryer before opening the cabinet, and clear lint from the exhaust path to support proper airflow. This is an OEM part sourced directly from the manufacturer.
High Limit Thermostat and Thermistor Kit – Part Number: AGM30045804
$103.35
In Stock
High Limit Thermostat and Thermistor Kit
★★★★★
★★★★★
(14)
Part #AGM30045804
This dryer thermistor temperature sensor helps monitor and regulate the temperature inside a dryer. This part includes the wire harness. If your dryer overheats, does not produce enough heat, or takes too long to dry, then the thermistor might be defective or damaged. This can cause a fault code and could begin either prolonging or shortening drying time. As a safety precaution, make sure to unplug the dryer from the power source before beginning this installation, and wear gloves to protect your hands. Refer to the installation instructions provided by the manufacturer for further guidance.
Lint Filter – Part Number: ADQ73373201
$77.22
In Stock
Lint Filter
★★★★★
★★★★★
(27)
Part #ADQ73373201
Trap loose fibres and lint with this dryer lint screen filter assembly. Its fine mesh catches debris from the air leaving the drum, while the plastic frame holds the screen securely in place. Torn mesh, a cracked frame, or warping may let lint pass through or keep the filter from seating properly. Replacing a damaged filter helps restore lint collection and proper fit. Remove lint after every load to maintain airflow, and gently wash away residue when needed, allowing the filter to dry fully before reinstalling it. This is an OEM part sourced directly from the manufacturer.
Dryer Thermostat Assembly – Part Number: 6931EL3001F
$58.25
In Stock
Dryer Thermostat Assembly
★★★★★
★★★★★
(2)
Part #6931EL3001F
Temperature protection in the dryer heating system depends on this rear high-limit thermostat assembly. It senses heat at its mounting location and opens the heating circuit when the temperature reaches its cutoff point, helping prevent excessive heat from damaging surrounding components. A faulty thermostat may interrupt heating, leave clothes damp, or prevent normal temperature control. Replacing a failed assembly helps restore the protective switching function needed during drying. The thermostat works within the heating circuit to limit heat when operating temperatures rise too high. This is an OEM part sourced directly from the manufacturer.
Safety Switch Assembly – Part Number: EBF61496102
$52.75
In Stock
Pulley Idle – Part Number: 4560EL3001A
$30.53
In Stock
Pulley Idle
★★★★★
★★★★★
(5)
Part #4560EL3001A
The drive belt moves smoothly around this dryer idler pulley wheel as the motor turns the drum. Working within the belt tensioning mechanism, the pulley guides the belt and helps maintain steady contact with the drive system. A worn, cracked, or seized wheel may cause squealing, grinding, belt slippage, or interrupted tumbling. Replacing a damaged pulley helps restore free belt movement and reliable drum rotation. Its rotating surface supports the belt during operation, reducing the friction that can lead to noise and premature belt wear. This is an OEM part sourced directly from the manufacturer.
Dryer Leg – Part Number: 4778EL3001B
$16.45
In Stock
Dryer Leg
★★★★★
★★★★★
(1)
Part #4778EL3001B
A steady dryer starts with firm support at each corner of the cabinet. This black plastic leveling leg threads into the appliance base and adjusts in height to compensate for uneven flooring. A cracked foot, stripped threads, or a missing leg may leave the dryer rocking or vibrating during operation. Replacing a damaged leg restores adjustable support and helps keep the cabinet level. Turning the threaded foot raises or lowers that corner, allowing the dryer to rest securely on the floor. This is an OEM part sourced directly from the manufacturer.
Motor Pulley Assembly – Part Number: 4561EL3002A
$69.25
In Stock
Motor Pulley Assembly
★★★★★
★★★★★
(1)
Part #4561EL3002A
Proper belt tension keeps the dryer drum turning steadily during a cycle. This idler pulley assembly guides the drive belt and maintains tension as the motor rotates the drum. A worn, damaged, or seized pulley may cause squealing, allow the belt to slip, or prevent the drum from tumbling. Replacing a faulty assembly helps restore smooth belt movement and reliable drum rotation. The pulley turns continuously against the belt during operation, making a freely rotating wheel important for reducing friction and belt wear. This is an OEM part sourced directly from the manufacturer.
Locker Assembly – Part Number: 4027EL1001B
$35.33
In Stock
Locker Assembly
Part #4027EL1001B
Blower Wheel – Part Number: 5835EL1002A
$101.94
In Stock
Blower Wheel
★★★★★
★★★★★
(1)
Part #5835EL1002A
Moist air leaves the dryer with help from this blower wheel, which mounts to the drive motor shaft and pulls air through the drum toward the exhaust vent. Its rotating fins maintain the airflow needed to carry moisture away from clothing during drying. Cracks, broken fins, or a worn hub may cause rattling, vibration, or reduced airflow that leaves loads taking longer to dry. Replacing a damaged wheel helps restore air movement through the dryer and supports normal drying performance. This is an OEM part sourced directly from the manufacturer.
1 - 12 of 83