EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79679472000 Kenmore Dryer - Parts

25 - 36 of 101

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Moisture Sensor Wire Harness – Part Number: 6631EL3003B
$35.33
In Stock
Moisture Sensor Wire Harness
★★★★★
★★★★★
(1)
Part #6631EL3003B
Moisture sensing relies on an intact electrical connection between the sensor bars and dryer controls. This moisture sensor wire harness carries the signal used to monitor dampness during automatic drying cycles. Broken wiring, damaged insulation, or corroded terminals may interrupt that signal and cause cycles to end too soon or run longer than expected. Replacing a damaged harness helps restore the sensor connection so the control can respond to changing moisture levels and manage drying time as clothes become dry during the cycle. This is an OEM part sourced directly from the manufacturer.
Holder – Part Number: 4930EL2003B
$35.33
In Stock
Holder
Part #4930EL2003B
Lamp Cover – Part Number: 3550EL2001A
$16.45
In Stock
Sensor Assembly – Part Number: 6501EL3001A
$159.60
In Stock
Sensor Assembly
Part #6501EL3001A
This dryer flame sensor detects heat from the igniter and burner flame, helping the gas heating system work properly. Located near the burner, it plays a role in the sequence that lights the gas and produces warm air for drying. A faulty sensor may keep the burner from lighting, leaving clothes damp even though the drum still turns. Replacing a failed sensor helps restore normal heating so warm air can flow through the drum and remove moisture from your laundry. This is an OEM part sourced directly from the manufacturer.
Blower Wheel – Part Number: 5835EL1002A
$101.94
In Stock
Blower Wheel
★★★★★
★★★★★
(1)
Part #5835EL1002A
Moist air leaves the dryer with help from this blower wheel, which mounts to the drive motor shaft and pulls air through the drum toward the exhaust vent. Its rotating fins maintain the airflow needed to carry moisture away from clothing during drying. Cracks, broken fins, or a worn hub may cause rattling, vibration, or reduced airflow that leaves loads taking longer to dry. Replacing a damaged wheel helps restore air movement through the dryer and supports normal drying performance. This is an OEM part sourced directly from the manufacturer.
Rack – Part Number: 3750EL0001C
$42.12
In Stock
Rack
★★★★★
★★★★★
(4)
Part #3750EL0001C
Dry items without tumbling with this stationary dryer drying rack. It supports suitable shoes, sweaters, and other items inside the drum while allowing warm air to circulate around them. Keeping items still helps reduce thumping and limits the stretching or impact associated with tumbling. The open rack design provides airflow beneath supported items during the selected drying cycle. Replace the rack if cracks or broken supports prevent it from holding items securely, and follow garment care labels when choosing items for rack drying. This is an OEM part sourced directly from the manufacturer.
Duct Assembly – Part Number: 5209EL1006A
$62.65
In Stock
Micro Switch – Part Number: EBF61734701
$35.33
In Stock
Micro Switch
Part #EBF61734701
Also known as a belt switch.
Heat Duct Assembly – Part Number: 5209EL1001E
$123.49
Special Order
Assembly – Part Number: 383EEL9001G
$16.45
In Stock
Assembly
Part #383EEL9001G
Lamp,Incandescent – Part Number: 6913EL3001A
No Longer Available
Lamp,Incandescent
Part #6913EL3001A
Screw,Tapping – Part Number: 1TPL0303218
$16.45
In Stock
Screw,Tapping
Part #1TPL0303218
25 - 36 of 101