Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Butter bin door had broken
1 personfound this instruction helpful.
Mary from DEL MAR, CA
Really Easy
Less than 15 mins
Simple replace of door, fits perfectly
Was this helpful?
Thank you for voting!
Replace switch
1 personfound this instruction helpful.
Dean from HILLSDALE, MI
Really Easy
Less than 15 mins
Screw drivers
Read previous tips Taped off area around switch to protect surface Used putty knife to extract switch Used screwdriver to separate connector from switch Plugged in connector Pushed switch assembly into opening Removed tape
Was this helpful?
Thank you for voting!
The plastic cover on the butter area had broken.
1 personfound this instruction helpful.
Elizabeth from TALLAHASSEE, FL
Really Easy
Less than 15 mins
Just had to slip the 2 pegs into the existing holes.
Was this helpful?
Thank you for voting!
Previous glass shelf shattered into a million pieces while cleaning.
1 personfound this instruction helpful.
Susan from SAFETY HARBOR, FL
Really Easy
Less than 15 mins
Just laid the shelf down. Fit like a glove!
Was this helpful?
Thank you for voting!
door slight switch failed
1 personfound this instruction helpful.
Greg from CASA GRANDE, AZ
Really Easy
Less than 15 mins
Pliers
Covered the sidewall with tape to protect. Pried the switch out with knife blade and removed electric plug with needle nose pliers. placed plug in new switch and pushed switch into the hole in the side wall. Took about five minutes.
Was this helpful?
Thank you for voting!
Door light switch, 3rd one I have replaced in 6 years made in China.
1 personfound this instruction helpful.
Charles from CURWENSVILLE, PA
Really Easy
Less than 15 mins
Pliers, Screw drivers
Easy install, small screwdriver under back of old switch push out and pull out with small pliers. unsnap the old plug and install new. YOUR DONE
Was this helpful?
Thank you for voting!
replace refrigerator ice bin because old bin would not dispense ice.
1 personfound this instruction helpful.
Kathy from PORTER, TX
Very Easy
Less than 15 mins
Slid new bin into place. It works perfectly now.
Was this helpful?
Thank you for voting!
Interior light switch not working
1 personfound this instruction helpful.
Sharon from HOULTON, ME
Very Easy
Less than 15 mins
Screw drivers
Remove two screws on top of the fridge; removed old switch and inserted new switch. Worked like a charm. Replace casing and screws.
Was this helpful?
Thank you for voting!
The switch became intermittent - Possibly a poor designe
1 personfound this instruction helpful.
Sidney from ENDICOTT, NY
Very Easy
Less than 15 mins
Screw drivers
Used a small screw driver inserted into the front of the switch (facing the front) and pried until the switch was coming out. When out, I removed the connect harness and replace the switch with a new one.
Was this helpful?
Thank you for voting!
The glass shattered & needed to be replaced
2 of 4 peoplefound this instruction helpful.
David from HAMPTON, GA
Very Easy
Less than 15 mins
Just popped it in, just as easy as that!
Was this helpful?
Thank you for voting!
Part was delivered broken
1 personfound this instruction helpful.
Karen from GEORGETOWN, TX
Very Difficult
More than 2 hours
The past I ordered was broken upon delivery. I asked for a replacement and was refunded the charge. Tried to contact you but "due to covid" you aren't taking calls. Net result: I ordered the part from another source, got it, installed easily. Won't use you again.
Was this helpful?
Thank you for voting!
Broken shelf for the vegatable bins
1 personfound this instruction helpful.
Katherine from NEW PRT RCHY, FL
Very Difficult
More than 2 hours
The glass was ordered correctly. The part was too big for mt refrigerator. I tried to send it back, but I got no reply. I tried cutting the glass to size and it shattered. I wasted 60.00 and im disgusted with your company.
Was this helpful?
Thank you for voting!
Water dispenser not working
1 personfound this instruction helpful.
Michael from BRAINTREE, MA
Really Easy
30 - 60 mins
Removed back panel and water inlet valve and replaced with a new water inlet valve
Was this helpful?
Thank you for voting!
Seal was damaged
1 personfound this instruction helpful.
Billy from AUGUSTA, GA
Really Easy
30 - 60 mins
Pliers, Screw drivers
Have your wonderful Grandson do the repair work.
Was this helpful?
Thank you for voting!
Right door cam broken
1 of 2 peoplefound this instruction helpful.
Gary from Goose Creek, SC
Easy
30 - 60 mins
Screw drivers
Remove door seal and cam shaft (one piece). Remove broken cam by removing Philips head screw. Replace broken cam with new cam and reassemble. The actual repair took about 15 minutes however the majority of time was spent figuring out that the door seal and cam shaft had to be removed, no tools required.
My Orders
