EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

7957976 Kenmore Freezer - Instructions

All Instructions for the 7957976
31 - 45 of 114

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
My LG Ice Maker stopped making ice
2 of 2 people found this instruction helpful.
  • Jim from SCOTTSDALE, AZ
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Once I determined the problem to be the ice maker I got on line and came across "Part Select" website, I simply put in the make & model # and I quickly found the part I needed and placed my order, much to my surprise I received the replacement part the next day. The removal and installation was extremely easy, I simply removed two "Allen" head screws holding the ice maker in place and removed the unit, next I un-plugged the electrical coupling and removed the ground wire. I installed the new part in the same manner the entire process took me less the 15 minutes, and most importantly we had ice in less then 2 hours.
Was this helpful?
Thank you for voting!
Replacement water valve.
2 of 2 people found this instruction helpful.
  • Christopher from MECHANICSBURG, PA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Wrench (Adjustable)
Easy job. Just don't get the parts from this place. First part was no good and delivered was past deadline after I paid for expedited shipping. Had to get new part delivered which in three days increased in price and then still waited for ten days WITH expedited shipping. Have not been reimbursed for first part that was no good AND my expedited shipping fee. Shop somewhere else.
Was this helpful?
Thank you for voting!
Water valve had scaley stuff all over it. Needed changing
2 of 2 people found this instruction helpful.
  • Darrell from SNELLVILLE, GA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
Remove back door and then shut water of to the refrigerator. Then remove old valve. Have towel ready for excess water when you remove nut to valve. Install new valve screw to refrig. Turn on water and check for leaks.
Was this helpful?
Thank you for voting!
light didn't come on when the door was opened
2 of 2 people found this instruction helpful.
  • William L from SUMAS, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I took a very thin bladed screwdriver and took the old part out -carefully.
The new part fit in quite easily.
Was this helpful?
Thank you for voting!
Icing up in the freezer due to poor gasket
2 of 2 people found this instruction helpful.
  • Maryann from BROOKFIELD, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Watched a couple of YouTube videos and then went at it
Was this helpful?
Thank you for voting!
Switch stops working
2 of 2 people found this instruction helpful.
  • David from PENNSVILLE, NJ
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Replace with new switch. this is the third switch i have replaced in 10 years. the only part, besides a light bulb, that has gone bad. obviously this is a problem with this model for Kenmore, or just poor switch design.
Was this helpful?
Thank you for voting!
Ice crystals appearing on the face of the freezer draws
2 of 2 people found this instruction helpful.
  • Craig from SPRING HILL, FL
  • Really Easy
  • Less than 15 mins
Part Select had a great video which made the repair easy, using a putty knife to start removing the freeze door gasket. Once removed the install is simple just snap the new gasket into the track, but start at the corner. Other company's have a video requiring you to remove the entire freezer compartment out of the appliance, unnecessary w aste of time and labor.
Was this helpful?
Thank you for voting!
LED’s we’re not working only 2 we’re lit
2 of 3 people found this instruction helpful.
  • Alan from MADISON, ME
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Remove 2 screws swing light down a little bit and pull it to front unplug wires . The hard part of job was finding new replacement light, Partselect.com was only sight I could find that had new replacement number and had the light . Other sites including LG site would only tell me the part number on old lights was discontinued 2 of sites said try used appliance dealers
Was this helpful?
Thank you for voting!
Leaking
2 of 3 people found this instruction helpful.
  • Johnny from MOUNT OLIVE, AL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Swapped old one with new one. New one had extra plug not needed.
Was this helpful?
Thank you for voting!
Light switch for refrigerator not functioning
2 of 3 people found this instruction helpful.
  • shirley from ONALASKA, WI
  • Easy
  • 30 - 60 mins
  • Screw drivers
Followed instructions online
Was this helpful?
Thank you for voting!
Seal was damaged
1 person found this instruction helpful.
  • Billy from AUGUSTA, GA
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Have your wonderful Grandson do the repair work.
Was this helpful?
Thank you for voting!
Water dispenser not working
1 person found this instruction helpful.
  • Michael from BRAINTREE, MA
  • Really Easy
  • 30 - 60 mins
Removed back panel and water inlet valve and replaced with a new water inlet valve
Was this helpful?
Thank you for voting!
the ice bin was extremely easy to set in....no explanation necessary however, The customer service left a lot to be desired!
1 person found this instruction helpful.
  • Charles from CHATTANOOGA, TN
  • Really Easy
  • 30 - 60 mins
The ice bin I ordered did not arrive on time and, when tracking indicated it was delivered, it was not here. I notified customer service and was told that they would cancel that order and I could order again.and make a payment, to include shipping, again and I would be reimbursed. Two days later the first order showed up. I notified cu stomer service that the item had shown up and I installed it therfore requested the second order be deleted. Was told that it was already enroute and they would send me necessary paperwork to return it. upon receipt of the paperwork I followed the instructions bur, when I contacted UPS (as directed) was advised that I would have to pay shipping of about $19. unless Partselect requested and paid for shipping and sent me the shipping label. I received the shipping label but, when I contacted UPS was advised that I would stoll have to pay to have the item picked up at my house and, unless I wanted to pay that cost I should deliver the package to a UPS pick up location........all the way across town through heavy traffic, about 25 miles. I should have kept the second bin along with the first, given it away or thrown it away and the cost would have been re imbursed. Trying to do the right thing, I was responsible for additional cost and aggravation .......Thanks a lot!!!!
Was this helpful?
Thank you for voting!
Light quit coming on when door opened.
1 person found this instruction helpful.
  • Calvin from Northome, MN
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
Unplug from wall receptacle. Pry switch out with screwdriver while pushing on inner tab. Then disconnect electrical plug.
Was this helpful?
Thank you for voting!
Wrong parts sent twice. One of the parts was a substitute 2" too long
1 person found this instruction helpful.
  • BRENT from RENO, NV
  • Very Difficult
  • 30 - 60 mins
Unable to complete repair, had to send parts back
Part should have been PS11732074, but got PS11732704- wrong part
This was a substitute part and was 2" too long

Waiting for refund on this part. It cost me $14.50 to return it by UPS!!!
Was this helpful?
Thank you for voting!
All Instructions for the 7957976
31 - 45 of 114