EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

7957878 Kenmore Freezer - Instructions

All Instructions for the 7957878
16 - 30 of 71

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Low water pressure which in turn led to no water and no ice.
7 of 16 people found this instruction helpful.
  • Daniel from ABERDEEN, WA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench set
Unplugged fridge, shut off water supply disconnected water supply from fridge. Remove screws that hold lower cover on back of fridge, removed screws holding valve assembly to fridge. Disconnect two electrical connections, remove black c-clip on out flow water line, lift fitting on outflow line side and pull water line off. Replace with va lve assembly in reverse order
Was this helpful?
Thank you for voting!
Blower motor out on condenser
4 of 7 people found this instruction helpful.
  • George from WHITE BIRD, ID
  • Easy
  • 30 - 60 mins
  • Screw drivers
followed detailed movie from Utube video
Was this helpful?
Thank you for voting!
Replaced hose and it was exactly what I needed.
3 of 5 people found this instruction helpful.
  • Donald from CLEBURNE, TX
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
Replaced old hose and installed the new one. Was very simple with the instructions in your email..... step by step, could not of been any similar.... you guys rock
Was this helpful?
Thank you for voting!
Water valve had scaley stuff all over it. Needed changing
2 of 2 people found this instruction helpful.
  • Darrell from SNELLVILLE, GA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
Remove back door and then shut water of to the refrigerator. Then remove old valve. Have towel ready for excess water when you remove nut to valve. Install new valve screw to refrig. Turn on water and check for leaks.
Was this helpful?
Thank you for voting!
Replacement water valve.
2 of 2 people found this instruction helpful.
  • Christopher from MECHANICSBURG, PA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Wrench (Adjustable)
Easy job. Just don't get the parts from this place. First part was no good and delivered was past deadline after I paid for expedited shipping. Had to get new part delivered which in three days increased in price and then still waited for ten days WITH expedited shipping. Have not been reimbursed for first part that was no good AND my expedited shipping fee. Shop somewhere else.
Was this helpful?
Thank you for voting!
LED’s we’re not working only 2 we’re lit
2 of 3 people found this instruction helpful.
  • Alan from MADISON, ME
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Remove 2 screws swing light down a little bit and pull it to front unplug wires . The hard part of job was finding new replacement light, Partselect.com was only sight I could find that had new replacement number and had the light . Other sites including LG site would only tell me the part number on old lights was discontinued 2 of sites said try used appliance dealers
Was this helpful?
Thank you for voting!
Leaking
2 of 3 people found this instruction helpful.
  • Johnny from MOUNT OLIVE, AL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Swapped old one with new one. New one had extra plug not needed.
Was this helpful?
Thank you for voting!
Part was delivered broken
1 person found this instruction helpful.
  • Karen from GEORGETOWN, TX
  • Very Difficult
  • More than 2 hours
The past I ordered was broken upon delivery. I asked for a replacement and was refunded the charge. Tried to contact you but "due to covid" you aren't taking calls. Net result: I ordered the part from another source, got it, installed easily. Won't use you again.
Was this helpful?
Thank you for voting!
Slow water for drinking
2 of 4 people found this instruction helpful.
  • Steven from SEBASTIAN, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers, Wrench set
Just like on YouTube very easy to do
Was this helpful?
Thank you for voting!
the ice bin was extremely easy to set in....no explanation necessary however, The customer service left a lot to be desired!
1 person found this instruction helpful.
  • Charles from CHATTANOOGA, TN
  • Really Easy
  • 30 - 60 mins
The ice bin I ordered did not arrive on time and, when tracking indicated it was delivered, it was not here. I notified customer service and was told that they would cancel that order and I could order again.and make a payment, to include shipping, again and I would be reimbursed. Two days later the first order showed up. I notified cu stomer service that the item had shown up and I installed it therfore requested the second order be deleted. Was told that it was already enroute and they would send me necessary paperwork to return it. upon receipt of the paperwork I followed the instructions bur, when I contacted UPS (as directed) was advised that I would have to pay shipping of about $19. unless Partselect requested and paid for shipping and sent me the shipping label. I received the shipping label but, when I contacted UPS was advised that I would stoll have to pay to have the item picked up at my house and, unless I wanted to pay that cost I should deliver the package to a UPS pick up location........all the way across town through heavy traffic, about 25 miles. I should have kept the second bin along with the first, given it away or thrown it away and the cost would have been re imbursed. Trying to do the right thing, I was responsible for additional cost and aggravation .......Thanks a lot!!!!
Was this helpful?
Thank you for voting!
Water dispenser not working
1 person found this instruction helpful.
  • Michael from BRAINTREE, MA
  • Really Easy
  • 30 - 60 mins
Removed back panel and water inlet valve and replaced with a new water inlet valve
Was this helpful?
Thank you for voting!
Seal was damaged
1 person found this instruction helpful.
  • Billy from AUGUSTA, GA
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Have your wonderful Grandson do the repair work.
Was this helpful?
Thank you for voting!
The cover had cracked
1 person found this instruction helpful.
  • Kathryn from Albuquerque, NM
  • Really Easy
  • 30 - 60 mins
1. Remove all food from the shelf and take out the crisper drawers.
2. Remove the glass and take out the crisper frame.
3. Take the screws out of the frame that are holding the cover frame in place and remove the old cover frame..
4. Install the new cover and replace screws.
5. Re- install the drawers and glass. ... Read more />
( I'm a 76 yr old female and did it myself with the help of the instructions you provided!). Thanks
Was this helpful?
Thank you for voting!
Door Stopper had snapped off
1 person found this instruction helpful.
  • Lawrence from FALL RIVER, MA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Unscrewed what remained from broken door stop, aligned new one, screwed it in. Done!
Was this helpful?
Thank you for voting!
Broken plastic/glass
1 person found this instruction helpful.
  • Bill from MURRIETA, CA
  • Very Easy
  • Less than 15 mins
Now that you have to buy a complete assembly that includes the drawer in the classy window it's very simple to replace however you buying parts that you don't need simply because G no longer makes the window. Which I find rather odd being as though that they make the whole assembly think and sell windows by themselves for less than 2/3 of what I spent through the whole assembly
Was this helpful?
Thank you for voting!
All Instructions for the 7957878
16 - 30 of 71