Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The shelf that holds the crisper drawers had cracked and finally broken.
1 personfound this instruction helpful.
Fred Lee from BOTHELL, WA
Really Easy
30 - 60 mins
Bought a new shelf. Bought a center support (new), Put the new center support in the shelf. Removed glass, old shelf and drawers. Replaced the broken shelf by hooking the new one in to existing supports. Replaced glass. Replaced drawers.
Was this helpful?
Thank you for voting!
Ice chute door would open ok, but would not close unless you stuck your finger up inside and closed it.
2 of 5 peoplefound this instruction helpful.
HARRY from SPARKS, NV
Easy
30 - 60 mins
Screw drivers
Found a LG parts video and followed each step. Simple except getting the end of rod into the solenoid arm. Took a few tries, but got it.
Cover the putty knife with tape so you do not scratch the side wall where the switch is located. Slide the knife under the edge of the switch and push in a bit towards the switch and slightly twist to pop the switch out of its hole. Disconnect the wires from the switch and simply plug in the new switch. Push wiring back into the hole and
... Read morecareful push the switch into the hole until it snaps into place.
Read less
Was this helpful?
Thank you for voting!
Left door when opened the light wouldn’t come on. Checked the light, ok. Ordered push button switch
1 of 2 peoplefound this instruction helpful.
Richard from TULLY, NY
Really Easy
Less than 15 mins
Screw drivers, Wrench (Adjustable)
Removed the cover 2 screws Squeezed the 2 side sleeves and removed Snapped in new button, replaced the cover. Done
Was this helpful?
Thank you for voting!
the light did not work when door was opened. At first it would flicker then off completely.
1 of 2 peoplefound this instruction helpful.
Alma from Winterport, ME
Very Easy
Less than 15 mins
Screw drivers
My son just pried out the old switch with a screw driver snapped out the old one and snapped in the new one. Pretty sure even I could have done this. Very quick and easy. Thanks. :-)
Was this helpful?
Thank you for voting!
Refrigerator light had a short in it and would randomly work
1 of 3 peoplefound this instruction helpful.
Tammy from HAGERSTOWN, MD
Very Easy
Less than 15 mins
Screw drivers
Unplugged the fridge. Used a screwdriver to loosen the switch. Easy to disconnect from fridge and just plugged the new switch in. Popped right back into the side of the fridge and worked perfectly.
Was this helpful?
Thank you for voting!
The water filter needed to be replaced.
1 of 3 peoplefound this instruction helpful.
Alice from Wimberley, TX
Really Easy
Less than 15 mins
I screwed the old one out and replaced it with the new one. A no-brainer. The thing that was so amazing was that I ordered the filter on the intrnet and it arrived the very next day!!! I was very surprised and pleased with the very quick shipping!!!
Was this helpful?
Thank you for voting!
water supply to ice maker leaked
0 of 1 peoplefound this instruction helpful.
john from locust valley, NY
Really Easy
Less than 15 mins
Screw drivers
Gave model number on website, found picture of icemaker section. Ordered part that came in 3 days and switched old for new
Was this helpful?
Thank you for voting!
we had a broken shelf glass in our refridgerator.
0 of 1 peoplefound this instruction helpful.
John H from Groesbeck, TX
Really Easy
Less than 15 mins
When the shelf was delivered, all we had to do was open the door of the fridg. and put the glass into place. pretty easy, huh?
Was this helpful?
Thank you for voting!
Unit kept beeping as if the freezer door was open
0 of 1 peoplefound this instruction helpful.
Paul from San Jose, CA
Really Easy
Less than 15 mins
Pliers
I popped the old switch out of place and then disconnected the wire harness from the switch with a pair of needle nose pliers. I then inserted the harness into the new switch and popped the switch into place. Super easy and fast.
Was this helpful?
Thank you for voting!
light was not going on sometimes, or needed wiggling to work
0 of 1 peoplefound this instruction helpful.
Nancy from Hallandale Beach, FL
Really Easy
Less than 15 mins
Screw drivers
purchased a new switch. The old switch just needed to be lightly pried out with a screw driver, then it was simple to unplug the old, and plug in the new. Voila! Light !
Was this helpful?
Thank you for voting!
light out
0 of 1 peoplefound this instruction helpful.
Jack from Ellenton, FL
Easy
Less than 15 mins
Screw drivers
slid screw driver under edge of switch, easy.
Was this helpful?
Thank you for voting!
refridge door stopper broken
1 of 4 peoplefound this instruction helpful.
Robert from Vacaville, CA
Easy
Less than 15 mins
Screw drivers
easy, a screw driver repaired in a mintue
Was this helpful?
Thank you for voting!
The water line was leaking
0 of 1 peoplefound this instruction helpful.
Awilda from Staten Island, NY
Easy
15 - 30 mins
Screw drivers
Removed the damaged tube and replaced the it with a new one.
Was this helpful?
Thank you for voting!
The fridge died and couldn't find right parts needed
0 of 1 peoplefound this instruction helpful.
Barbara from Wildersville, TN
A Bit Difficult
More than 2 hours
Screw drivers
I was told the mother board went out. Took a few months to finally get one myself after repairman didn't come through. It turned out not to be the motherboard that sears repairman tested it for and said that's what it needed. I found Parts select after going round and round with sears parts refusing to accept return. There prices were be
... Read moretter, as well as shipping and it came so quick i thought it was over night. The controller assembly was not the problem so we have it for a spare now. It was the freezer fan but even after installing it nothing would work is why we ordered the controller assembly. after 2 days and about 7 hours of checking, taking apart, rechecking assembling by my determined electrician it turned out to be a loose wire. LOL hope this helps someone. I'm just glad to have my fridge again! Blessings!!!
My Orders
