All Installation Instructions for Kenmore Refrigerator 795725

Leaking

2 of 3 people found this instruction helpful.

Johnny from MOUNT OLIVE, AL
Really Easy
30 - 60 mins
Screw drivers

Swapped old one with new one. New one had extra plug not needed.

Was this helpful?

The refrigerator ice maker needed replacing

2 of 3 people found this instruction helpful.

Larry from GODDARD, KS
Really Easy
30 - 60 mins
Screw drivers

The only tool required was a Phillips screwdriver. I disassembled the old icemaker and unplugged the electrical snap in device. I removed the ground wire. Then reversed the steps in replacing the refrigerator ice maker kit assembly. It took slightly over 30 minutes to remove and replace the ice maker.

Was this helpful?

Fan Blade Loose

2 of 4 people found this instruction helpful.

Kyle from NEW ORLEANS, LA
Very Difficult
More than 2 hours

I paid for the expedited shipping and they sent me a cheap knockoff attempt at the part that had the wrong size hole. So they refunded me the money I paid for the part but not the shipping, and then I crushed the part they sent me with a hammer and threw it away.

Was this helpful?

Ice tray cracked

1 person found this instruction helpful.

Eugene from ENCINITAS, CA
Really Easy
30 - 60 mins
Screw drivers

Removed the old one and replaced with new just remember do your do diligence watch YouTube videos makes repair a lot easier

Was this helpful?

Icemaker not working

1 person found this instruction helpful.

Franck from ST PETE BEACH, FL
Really Easy
30 - 60 mins
Screw drivers

Removed ice bin
Unscrew the 3 screws.
Lift ice maker for the bottom to remove it but do not pull it until the power is unplug from the part.
Install the new part the same way you removed the old part.
Turn the switch and waiting 48 hours before the ice bin start getting ice

Was this helpful?

Slow water for drinking

2 of 4 people found this instruction helpful.

Steven from SEBASTIAN, FL
Easy
15 - 30 mins
Screw drivers, Wrench set

Just like on YouTube very easy to do

Was this helpful?

Broken spring on flapper door

1 person found this instruction helpful.

Richard from IMPERIAL, CA
Very Easy
15 - 30 mins
Screw drivers

Unplugged the frig and removed two phillip screws on flapper door of left door... Unplugged the electrical connector and removed flapper...
Picked up new flapper and snapped electrical contractor together... Slid new flapper bar into place and inserted two phillip screws... Job complete in 15 minutes...

Was this helpful?

Ice Maker and Water dispenser stopped working

2 of 4 people found this instruction helpful.

Donald from BETHPAGE, NY
Really Easy
15 - 30 mins
Pliers, Screw drivers

Pulled the fridge out.
Unscrewed the back cover and the one screw holding the value assemble.
undid the 2 hoses and replaced the part.

Super SImple/

Was this helpful?

Ice tray was not rotating any longer

1 person found this instruction helpful.

Angela from SAINT JOSEPH, MO
Easy
15 - 30 mins
Screw drivers

Took the old one out and put the new one in.

Was this helpful?

Door Stopper had snapped off

1 person found this instruction helpful.

Lawrence from FALL RIVER, MA
Very Easy
Less than 15 mins
Screw drivers

Unscrewed what remained from broken door stop, aligned new one, screwed it in. Done!

Was this helpful?

Spring in the plate front assembly broke. Door plate assembly would not move into correct position, preventing door from closing.

1 person found this instruction helpful.

Robert from WARREN, RI
Very Easy
Less than 15 mins
Screw drivers

Followed Youtube video provided on the PartsSelect Website:

https://www.partselect.com/PS12374439-LG-AGU75188619-PLATE-ASSEMBLY-FRONT.htm?Inventory=12374439&SourceCode=20&SearchTerm=LFX28979ST

Made installation of the new part a piece of cake. Easy peasy!! Took less than 10 minutes.

Was this helpful?

Spring broken in door mullion

1 person found this instruction helpful.

Wayde from SEMINOLE, FL
Really Easy
Less than 15 mins
Screw drivers

Took 2 screws out and disconnect wire and install new part.

Was this helpful?

Removed old part.

1 person found this instruction helpful.

Steve from NORTH AURORA, IL
Very Easy
Less than 15 mins
Screw drivers

Installed new one.

Was this helpful?

Old part did not seal properly

1 person found this instruction helpful.

Donald from MERRITT IS, FL
Really Easy
Less than 15 mins
Screw drivers

Read the reviews from other members and just did as they said. Needed a screw driver and the info from past persons review couldn’t have been easier.

Was this helpful?

The spring on the mullion was broken so the mullion would not open to seal the other door.

1 person found this instruction helpful.

JANET from GRAND JCT, CO
Very Easy
Less than 15 mins
Screw drivers

I am a73 year old woman. If I can do this, anyone can. Super easy. Just watch the online video.

Was this helpful?

795725 Kenmore Refrigerator - Instructions