Made installation of the new part a piece of cake. Easy peasy!! Took less than 10 minutes.
Was this helpful?
Thank you for voting!
Large basket inside right door was broken.
1 personfound this instruction helpful.
Steve from DENHAM SPGS, LA
Really Easy
Less than 15 mins
Removed the old one and replaced with the new.
Was this helpful?
Thank you for voting!
Plastic bracket holding freezer drawer broke off
1 personfound this instruction helpful.
Terry from Broken Arrow, OK
Very Easy
Less than 15 mins
Screw drivers
Removed upper drawer/basket from freezer
Removed 2 Philips screws
Removed rail bracket assembly
Reinstalled reversing those steps
Works like new. Happy wife. Happy life. FYI- I am nearly 77 yrs young.
Was this helpful?
Thank you for voting!
Replaced cracked refrigerator door shelvers
1 personfound this instruction helpful.
Larry from SANTA ROSA, CA
Very Easy
Less than 15 mins
Slid the replacement shelves into place.
Was this helpful?
Thank you for voting!
The door bin cracked and broke.
1 personfound this instruction helpful.
Elizabeth from Huntington Beach, CA
Very Easy
Less than 15 mins
I just popped out the broken bin and slid the new one into the slots on the door.
The fix was easy. I appreciate the expert advice on which part to purchase, as that was difficult to figure out. I received a prompt response to my question and the replacement part came quickly.
Was this helpful?
Thank you for voting!
Previous glass shelf shattered into a million pieces while cleaning.
1 personfound this instruction helpful.
Susan from SAFETY HARBOR, FL
Really Easy
Less than 15 mins
Just laid the shelf down. Fit like a glove!
Was this helpful?
Thank you for voting!
Icemaker not working
1 personfound this instruction helpful.
Franck from ST PETE BEACH, FL
Really Easy
30 - 60 mins
Screw drivers
Removed ice bin Unscrew the 3 screws. Lift ice maker for the bottom to remove it but do not pull it until the power is unplug from the part. Install the new part the same way you removed the old part. Turn the switch and waiting 48 hours before the ice bin start getting ice
Was this helpful?
Thank you for voting!
The original spring in the mullion door broke
1 personfound this instruction helpful.
John from ELLWOOD CITY, PA
Easy
30 - 60 mins
Screw drivers
I disconnected the refrigerator power, removed the 2 screws holding the mullion door on the left side of the refrigerator French-door (it’s the flap that allows the door to close). Removed the broken spring and installed the replacement spring in its place. Reinstalled the mullion door by putting it in place and installing the previously
... Read moreremoved screws.
Read less
Was this helpful?
Thank you for voting!
Ice tray cracked
1 personfound this instruction helpful.
Eugene from ENCINITAS, CA
Really Easy
30 - 60 mins
Screw drivers
Removed the old one and replaced with new just remember do your do diligence watch YouTube videos makes repair a lot easier
Was this helpful?
Thank you for voting!
cracked bottom on door shelf bin
1 personfound this instruction helpful.
Sal from Atlantic beach, NY
Very Easy
30 - 60 mins
removed cracked one and install new part without tools.
The hose that feeds the Ice Maker broke,right where it goes in the Fridge.
2 of 4 peoplefound this instruction helpful.
William from BOWDOINHAM, ME
Easy
1- 2 hours
Screw drivers, Socket set
I actually didn't use what I got. Because there was all kinds of tubing coiled up in the door. We just fed the exsess all the way through the Fridge,and Bingo! It was done.
My Orders
