Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The hose that feeds the Ice Maker broke,right where it goes in the Fridge.
2 of 4 peoplefound this instruction helpful.
William from BOWDOINHAM, ME
Easy
1- 2 hours
Screw drivers, Socket set
I actually didn't use what I got. Because there was all kinds of tubing coiled up in the door. We just fed the exsess all the way through the Fridge,and Bingo! It was done.
Thanks to videos on You-Tube which showed step by step removal and replacement. It was a simple process. only thing missing on the video was information on the green ground wire.
Was this helpful?
Thank you for voting!
Ice buildup in corner of freezer.
1 of 2 peoplefound this instruction helpful.
Louis from BOYNTON BEACH, FL
Really Easy
15 - 30 mins
Screw drivers
Reviewed instructions on YouTube. Removed storage box.Removed Philips head screw on either side of track. Lifted door and placed it on table. Using a flat blade screwdriver removed old gasket (it did not looked damaged). Pressed new gasket into groove in door. Replaced door onto track and replaced screws. Replaced storage box. No more ice
... Read more buildup.
Read less
Was this helpful?
Thank you for voting!
The old ice maker had cracked and broken, and would no longer make ice.
1 of 2 peoplefound this instruction helpful.
Ron from MCKINNEY, TX
Easy
Less than 15 mins
Screw drivers
Six screws to remove the old one (I looked up the process on Youtube) and six screws had it back in tip top shape. Three wire connections, two were plug in and one was a ground wire. BTW: It was a 3 wire, not a 6 wire. I had ordered that by mistake and PartSelect made the return and replacement very easy.
Was this helpful?
Thank you for voting!
old gasket was damaged
1 of 2 peoplefound this instruction helpful.
Maria from TEQUESTA, FL
Really Easy
Less than 15 mins
i removed old and installed new gasket in 5 minutes. i watched a video. it was super easy .
Was this helpful?
Thank you for voting!
Replace the light switch for the refrigerator
1 of 2 peoplefound this instruction helpful.
Karyn from DURHAM, NH
Really Easy
Less than 15 mins
Cover the putty knife with tape so you do not scratch the side wall where the switch is located. Slide the knife under the edge of the switch and push in a bit towards the switch and slightly twist to pop the switch out of its hole. Disconnect the wires from the switch and simply plug in the new switch. Push wiring back into the hole and
... Read morecareful push the switch into the hole until it snaps into place.
Read less
Was this helpful?
Thank you for voting!
Bad door gasket
1 of 2 peoplefound this instruction helpful.
Ray from HOUMA, LA
Very Easy
Less than 15 mins
Very good removed old gasket and install new one in under 5 mins.
Was this helpful?
Thank you for voting!
Left door when opened the light wouldn’t come on. Checked the light, ok. Ordered push button switch
1 of 2 peoplefound this instruction helpful.
Richard from TULLY, NY
Really Easy
Less than 15 mins
Screw drivers, Wrench (Adjustable)
Removed the cover 2 screws Squeezed the 2 side sleeves and removed Snapped in new button, replaced the cover. Done
Was this helpful?
Thank you for voting!
In Door Ice Bin with built-in ice dispenser drive wheel gear broke when dispensing the ice.
1 of 2 peoplefound this instruction helpful.
Steven J from Phoenix, AZ
Very Easy
Less than 15 mins
I replaced the whole self-contained unit. I removed the old ice bin simply by lifting it out of the door and replacing it with a new one directly under the ice maker. It was a simple fix; no tools or service tech were required.
Was this helpful?
Thank you for voting!
the light did not work when door was opened. At first it would flicker then off completely.
1 of 2 peoplefound this instruction helpful.
Alma from Winterport, ME
Very Easy
Less than 15 mins
Screw drivers
My son just pried out the old switch with a screw driver snapped out the old one and snapped in the new one. Pretty sure even I could have done this. Very quick and easy. Thanks. :-)
Was this helpful?
Thank you for voting!
Door flapper
1 of 3 peoplefound this instruction helpful.
James from UPTON, MA
Very Easy
Less than 15 mins
Screw drivers
The new part was iffy out of box. Spring is not positioned symmetrically but it’s working for now. It was a pricey part to have a flaw.
Was this helpful?
Thank you for voting!
Manufacture says every 6 months so that's what I do to keep from having a problem
3 of 9 peoplefound this instruction helpful.
Theresa from DEERFIELD BCH, FL
Really Easy
Less than 15 mins
popped out popped right in ran water thru to get out air in line and waalaa it was done
Refrigerator light had a short in it and would randomly work
1 of 3 peoplefound this instruction helpful.
Tammy from HAGERSTOWN, MD
Very Easy
Less than 15 mins
Screw drivers
Unplugged the fridge. Used a screwdriver to loosen the switch. Easy to disconnect from fridge and just plugged the new switch in. Popped right back into the side of the fridge and worked perfectly.
Was this helpful?
Thank you for voting!
Ice chute would not open.
18 of 54 peoplefound this instruction helpful.
Steve from MUKWONAGO, WI
Easy
30 - 60 mins
Screw drivers
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.
Was this helpful?
Thank you for voting!
Cold water control rusty and leaking water
2 of 6 peoplefound this instruction helpful.
Homer from MARION, VA
Really Easy
30 - 60 mins
Screw drivers, Wrench (Adjustable)
Removed old part very easily and installed the new part without any problems. Used and adjustable wrench and screwdriver
My Orders
