My Orders
7957104 Kenmore Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Removed old part.
1 person
found this instruction helpful.
-
Steve from NORTH AURORA, IL
- Very Easy
- Less than 15 mins
-
Screw drivers
Installed new one.
Was this helpful?
Thank you for voting!
Old part did not seal properly
1 person
found this instruction helpful.
-
Donald from MERRITT IS, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Read the reviews from other members and just did as they said. Needed a screw driver and the info from past persons review couldn’t have been easier.
Was this helpful?
Thank you for voting!
Broken plastic/glass
1 person
found this instruction helpful.
-
Bill from MURRIETA, CA
- Very Easy
- Less than 15 mins
Now that you have to buy a complete assembly that includes the drawer in the classy window it's very simple to replace however you buying parts that you don't need simply because G no longer makes the window. Which I find rather odd being as though that they make the whole assembly think and sell windows by themselves for less than 2/3 of
... Read more
what I spent through the whole assembly
Read less
Was this helpful?
Thank you for voting!
Spring broken in door mullion
1 person
found this instruction helpful.
-
Wayde from SEMINOLE, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Took 2 screws out and disconnect wire and install new part.
Was this helpful?
Thank you for voting!
Butter bin door had broken
1 person
found this instruction helpful.
-
Mary from DEL MAR, CA
- Really Easy
- Less than 15 mins
Simple replace of door, fits perfectly
Was this helpful?
Thank you for voting!
Freezer door gasket needed replacing.
1 person
found this instruction helpful.
-
Stephen from DICKINSON, TX
- Really Easy
- Less than 15 mins
-
Pliers
Simply removed old gasket. Started in a corner with installing the new gasket. It went in easily and quickly.
Was this helpful?
Thank you for voting!
bad switch
1 person
found this instruction helpful.
-
Michael from TONAWANDA, NY
- Easy
- 15 - 30 mins
-
Screw drivers
The 2 minute or so video was not exactly matching the model that we had but the instructions were very good and important. The switch was a little difficult to get out from the side of the refrigerator.
Was this helpful?
Thank you for voting!
Broken spring on flapper door
1 person
found this instruction helpful.
-
Richard from IMPERIAL, CA
- Very Easy
- 15 - 30 mins
-
Screw drivers
Unplugged the frig and removed two phillip screws on flapper door of left door... Unplugged the electrical connector and removed flapper...
Picked up new flapper and snapped electrical contractor together... Slid new flapper bar into place and inserted two phillip screws... Job complete in 15 minutes...
Picked up new flapper and snapped electrical contractor together... Slid new flapper bar into place and inserted two phillip screws... Job complete in 15 minutes...
Was this helpful?
Thank you for voting!
Freezer door gasket formed gaps between door and refrigerator.
1 person
found this instruction helpful.
-
Cheryl from Ormond Beach, FL
- Really Easy
- 15 - 30 mins
Removed old gasket from the door and replaced with new gasket.
Was this helpful?
Thank you for voting!
Previous glass shelf shattered into a million pieces while cleaning.
1 person
found this instruction helpful.
-
Susan from SAFETY HARBOR, FL
- Really Easy
- Less than 15 mins
Just laid the shelf down. Fit like a glove!
Was this helpful?
Thank you for voting!
Lights didn't come on when door was opened
1 person
found this instruction helpful.
-
Philip from Ashland, MA
- A Bit Difficult
- 15 - 30 mins
-
Pliers, Screw drivers
I have moderate to good mechanical skills, but getting the old switch out was a sizeable challenge. Since this switch suffered some damage during extraction, I was lucky to have ordered a new one to replace it. Reinstall took approximately 90 seconds. PartSelect saved me an expensive service call.
Was this helpful?
Thank you for voting!
The spring on the mullion was broken so the mullion would not open to seal the other door.
1 person
found this instruction helpful.
-
JANET from GRAND JCT, CO
- Very Easy
- Less than 15 mins
-
Screw drivers
I am a73 year old woman. If I can do this, anyone can. Super easy. Just watch the online video.
Was this helpful?
Thank you for voting!
The plastic cover on the butter area had broken.
1 person
found this instruction helpful.
-
Elizabeth from TALLAHASSEE, FL
- Really Easy
- Less than 15 mins
Just had to slip the 2 pegs into the existing holes.
Was this helpful?
Thank you for voting!
Spring in the plate front assembly broke. Door plate assembly would not move into correct position, preventing door from closing.
1 person
found this instruction helpful.
-
Robert from WARREN, RI
- Very Easy
- Less than 15 mins
-
Screw drivers
Followed Youtube video provided on the PartsSelect Website:
https://www.partselect.com/PS12374439-LG-AGU75188619-PLATE-ASSEMBLY-FRONT.htm?Inventory=12374439&SourceCode=20&SearchTerm=LFX28979ST
Made installation of the new part a piece of cake. Easy peasy!! Took less than 10 minutes.
https://www.partselect.com/PS12374439-LG-AGU75188619-PLATE-ASSEMBLY-FRONT.htm?Inventory=12374439&SourceCode=20&SearchTerm=LFX28979ST
Made installation of the new part a piece of cake. Easy peasy!! Took less than 10 minutes.
Was this helpful?
Thank you for voting!
door slight switch failed
1 person
found this instruction helpful.
-
Greg from CASA GRANDE, AZ
- Really Easy
- Less than 15 mins
-
Pliers
Covered the sidewall with tape to protect. Pried the switch out with knife blade and removed electric plug with needle nose pliers. placed plug in new switch and pushed switch into the hole in the side wall. Took about five minutes.
Was this helpful?
Thank you for voting!