My Orders
79570 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The refrigerator ice maker needed replacing
2 of 3 people
found this instruction helpful.
-
Larry from GODDARD, KS
- Really Easy
- 30 - 60 mins
-
Screw drivers
The only tool required was a Phillips screwdriver. I disassembled the old icemaker and unplugged the electrical snap in device. I removed the ground wire. Then reversed the steps in replacing the refrigerator ice maker kit assembly. It took slightly over 30 minutes to remove and replace the ice maker.
Was this helpful?
Thank you for voting!
Light switch for refrigerator not functioning
2 of 3 people
found this instruction helpful.
-
shirley from ONALASKA, WI
- Easy
- 30 - 60 mins
-
Screw drivers
Followed instructions online
Was this helpful?
Thank you for voting!
Leaking
2 of 3 people
found this instruction helpful.
-
Johnny from MOUNT OLIVE, AL
- Really Easy
- 30 - 60 mins
-
Screw drivers
Swapped old one with new one. New one had extra plug not needed.
Was this helpful?
Thank you for voting!
Spring broke on Mullion
2 of 3 people
found this instruction helpful.
-
Michael from MONTGOMERY, AL
- Very Easy
- Less than 15 mins
-
Screw drivers
Watched the video. Took the screws out, unplugged the connection and slid mullion off. Then plugged the new one in, slid it on and attached the two screws.
Was this helpful?
Thank you for voting!
My ice maker wouldn't release the ice, nothing was frozen and the motor would just bind
2 of 3 people
found this instruction helpful.
-
Jodi from WINTER GARDEN, FL
- Very Easy
- 15 - 30 mins
-
Screw drivers
I bought the ice assembly motor only, super easy to install, remove the three main screws, lift out assembly, detach the cable. Then remove the screws on the parts, lift the tape, redo everything in reverse and it works flawlessly!
Was this helpful?
Thank you for voting!
LED’s we’re not working only 2 we’re lit
2 of 3 people
found this instruction helpful.
-
Alan from MADISON, ME
- Very Easy
- Less than 15 mins
-
Screw drivers
Remove 2 screws swing light down a little bit and pull it to front unplug wires . The hard part of job was finding new replacement light, Partselect.com was only sight I could find that had new replacement number and had the light . Other sites including LG site would only tell me the part number on old lights was discontinued 2 of sites
... Read more
said try used appliance dealers
Read less
Was this helpful?
Thank you for voting!
The spring on the mullion was broken so the mullion would not open to seal the other door.
1 person
found this instruction helpful.
-
JANET from GRAND JCT, CO
- Very Easy
- Less than 15 mins
-
Screw drivers
I am a73 year old woman. If I can do this, anyone can. Super easy. Just watch the online video.
Was this helpful?
Thank you for voting!
Removed old part.
1 person
found this instruction helpful.
-
Steve from NORTH AURORA, IL
- Very Easy
- Less than 15 mins
-
Screw drivers
Installed new one.
Was this helpful?
Thank you for voting!
The switch became intermittent - Possibly a poor designe
1 person
found this instruction helpful.
-
Sidney from ENDICOTT, NY
- Very Easy
- Less than 15 mins
-
Screw drivers
Used a small screw driver inserted into the front of the switch (facing the front) and pried until the switch was coming out. When out, I removed the connect harness and replace the switch with a new one.
Was this helpful?
Thank you for voting!
Interior light switch not working
1 person
found this instruction helpful.
-
Sharon from HOULTON, ME
- Very Easy
- Less than 15 mins
-
Screw drivers
Remove two screws on top of the fridge; removed old switch and inserted new switch. Worked like a charm. Replace casing and screws.
Was this helpful?
Thank you for voting!
rail that holds meat tray broken
1 person
found this instruction helpful.
-
Steve from GEORGE WEST, TX
- Very Easy
- Less than 15 mins
-
Screw drivers
remove all trays from refrigerator , remove screw holding rail and install new rail.
Was this helpful?
Thank you for voting!
Broken spring on flapper door
1 person
found this instruction helpful.
-
Richard from IMPERIAL, CA
- Very Easy
- 15 - 30 mins
-
Screw drivers
Unplugged the frig and removed two phillip screws on flapper door of left door... Unplugged the electrical connector and removed flapper...
Picked up new flapper and snapped electrical contractor together... Slid new flapper bar into place and inserted two phillip screws... Job complete in 15 minutes...
Picked up new flapper and snapped electrical contractor together... Slid new flapper bar into place and inserted two phillip screws... Job complete in 15 minutes...
Was this helpful?
Thank you for voting!
broken handle/ stripped fastening screws
1 person
found this instruction helpful.
-
Faison from EDENTON, NC
- Very Easy
- Less than 15 mins
removed old handle
Installed new handle with hex wrench used to tighten up
Installed new handle with hex wrench used to tighten up
Was this helpful?
Thank you for voting!
The fridge was not operating and a new main board was recommended
1 person
found this instruction helpful.
-
Athan from MIAMI LAKES, FL
- Very Easy
- Less than 15 mins
-
Screw drivers
Remove old main board and replace with a new one .
Was this helpful?
Thank you for voting!
Door Stopper had snapped off
1 person
found this instruction helpful.
-
Lawrence from FALL RIVER, MA
- Very Easy
- Less than 15 mins
-
Screw drivers
Unscrewed what remained from broken door stop, aligned new one, screwed it in. Done!
Was this helpful?
Thank you for voting!