79558 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator would not produce ice or water
1 person
found this instruction helpful.
-
Frank from TRAVERSE CITY, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced water pump assembly, all compression fittings easy to put together
Was this helpful?
Thank you for voting!
Cover broken when attempting to remove it so water filter could be replaced.
1 person
found this instruction helpful.
-
John from CAMDEN, NC
- Very Easy
- Less than 15 mins
It was a "snap to complete it" inasmuch as the part just snapped in.
Was this helpful?
Thank you for voting!
broken handle/ stripped fastening screws
1 person
found this instruction helpful.
-
Faison from EDENTON, NC
- Very Easy
- Less than 15 mins
removed old handle
Installed new handle with hex wrench used to tighten up
Installed new handle with hex wrench used to tighten up
Was this helpful?
Thank you for voting!
Interior light switch not working
1 person
found this instruction helpful.
-
Sharon from HOULTON, ME
- Very Easy
- Less than 15 mins
-
Screw drivers
Remove two screws on top of the fridge; removed old switch and inserted new switch. Worked like a charm. Replace casing and screws.
Was this helpful?
Thank you for voting!
gaskets worn out again
1 of 2 people
found this instruction helpful.
-
Keith from Phoenix, AZ
- Really Easy
- Less than 15 mins
replaced gaskets for the second time in four years
Other Parts Used:
Was this helpful?
Thank you for voting!
Left door when opened the light wouldn’t come on. Checked the light, ok. Ordered push button switch
1 of 2 people
found this instruction helpful.
-
Richard from TULLY, NY
- Really Easy
- Less than 15 mins
-
Screw drivers, Wrench (Adjustable)
Removed the cover 2 screws
Squeezed the 2 side sleeves and removed
Snapped in new button, replaced the cover. Done
Squeezed the 2 side sleeves and removed
Snapped in new button, replaced the cover. Done
Was this helpful?
Thank you for voting!
light was not going on sometimes, or needed wiggling to work
0 of 1 people
found this instruction helpful.
-
Nancy from Hallandale Beach, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
purchased a new switch. The old switch just needed to be lightly pried out with a screw driver, then it was simple to unplug the old, and plug in the new. Voila! Light !
Was this helpful?
Thank you for voting!
Both guide rails had cracked at the front end I guess do to excessive weight in the drawer.
0 of 1 people
found this instruction helpful.
-
Robert from Parkland, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Simply removed the drawer, then removed the shelf above which held the guides, removed the guides ( 3 screws per side )and replaced them.
Other Parts Used:
Was this helpful?
Thank you for voting!
water supply to ice maker leaked
0 of 1 people
found this instruction helpful.
-
john from locust valley, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
Gave model number on website, found picture of icemaker section. Ordered part that came in 3 days and switched old for new
Was this helpful?
Thank you for voting!
The rails for our cheese drawer broke
1 of 4 people
found this instruction helpful.
-
wendy from west chester, PA
- Easy
- Less than 15 mins
-
Screw drivers
Just unscrew screws from old rails (still in refridgerator ), and screw them into new rails. We tried to order these parts from another online part site and we got the wrong parts. Partselect.com had drawing of our fridge and it was very easy to navigate through the web site. Thank you!
Other Parts Used:
Was this helpful?
Thank you for voting!
Rails broke when overloaded
0 of 1 people
found this instruction helpful.
-
James from Bremerton, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed shelf that rails were mounted to. Used a std phillips screwdriver to loosen screws attaching the rails, three per side. Removed damaged rails, lined up new rails and tightened screws. Returned shelf to refrigerator and inserted tray on the new rails.
Other Parts Used:
Was this helpful?
Thank you for voting!
The water line was leaking
0 of 1 people
found this instruction helpful.
-
Awilda from Staten Island, NY
- Easy
- 15 - 30 mins
-
Screw drivers
Removed the damaged tube and replaced the it with a new one.
Was this helpful?
Thank you for voting!
plastic tube leaking at connector
1 of 5 people
found this instruction helpful.
-
GREG from STILLWATER, NJ
- Really Easy
- 15 - 30 mins
-
Pliers, Wrench (Adjustable)
Uncoupled the old connector, replaced with new connector and attached supply line. Repair easy with right part, prior to ordering the right part I had tried a compression fitting and it still leaked. U-tube and others demonstrating repair assured me I was on the right path.
Was this helpful?
Thank you for voting!
replace hand screw
2 of 11 people
found this instruction helpful.
-
dorothy from SALISBURY, MD
- Very Easy
- Less than 15 mins
-
Screw drivers
unfortunately my fridge stopped working. I purchased another but wanted to try and repair the old one. when ew one arrived, the old one was supposed to be put in garage but instead was hauled away. Had delivery return next day but they had as already removed and lost the handle screw for the bottom freezer and the screw that holds handle
... Read more
in place. ordered the handle screw and picked up the nut. very simple to install the screw and put handle back on.
Read less
Was this helpful?
Thank you for voting!
Two Door baskets were broken
-
Jill from Burleson, TX
- Really Easy
- Less than 15 mins
We had two of the door baskets break and so we had no room in the frig. My husband and I were talking about maybe just replacing the frig. He said lets see if we can find the parts online. So we came to this site, found our parts, ordered. Received very fast and installed seconds. Saved money on buying a new frig.
Was this helpful?
Thank you for voting!