My Orders
7955101 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
interior lights stay on
-
Rich from Pequannock, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
Changed door switch. Repair worked for a few days but re-occured. Possibly the other switch is bad .
Was this helpful?
Thank you for voting!
Each time we've had to move we have to remove the doors from the fridge to get it thru the front door.since water and ice run thru the freezer door there are 2 tubes that connect at the bottom of the freezer door that aren't meant to be separated very often if ever.it's easier to cut the tubing on b
-
Sarah from Elk Grove, CA
- A Bit Difficult
- 15 - 30 mins
-
Pliers
With alot of elbow grease and a pair of pliars we managed to get the old connector off wo cuttig the tubing as the tubing was getting to short from being cut once to many times & there was no more play in the length.Original connector was a different color and shapped slightly different than the new one so was a bit concerned that I had
... Read more
ordered the wrong part but it went one very easily & did not leak. We even managed to remove it again just to see if it was possible wo cutting again. it came off with no trouble.I would say the replacement part was a better fit than the original simply because we could remove it easily wo having to cut the tube!
Read less
Was this helpful?
Thank you for voting!
Threads were striped on water valve leaked needed new one
-
Nicholas from Melborne, FL
- Easy
- 30 - 60 mins
-
Screw drivers, Wrench set
Shut water valve off drained water in refrigerator instAlled new valve
Was this helpful?
Thank you for voting!