Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Stem broken off old after market switch
1 personfound this instruction helpful.
Gerald from MAITLAND, FL
Really Easy
15 - 30 mins
Screw drivers
Pulled control panel off front of unit and replaced switch wire for wire , went great because part sent was OME
Was this helpful?
Thank you for voting!
Broiler Element went out
1 personfound this instruction helpful.
Robert from KNOXVILLE, TN
A Bit Difficult
30 - 60 mins
Haven’t got to repair it yet. For the part has not arrived yet and I have no way to track it. For I’ve never received a tracking number
Was this helpful?
Thank you for voting!
Broiler element burned out
2 of 4 peoplefound this instruction helpful.
Dominick from Greensburg, PA
Really Easy
30 - 60 mins
Socket set
I removed the four screws holding the element in place and pulled the element out and disconnected the two wire. Installation was pretty much the reverse of the removal except, when I went to put the two screws holding the element to the top of the oven I discovered the holes were rusted out. I looked for inserts to put in the holes bu
... Read moret every time I tried different inserts the holes got bigger. I finally realized the oven is just sheet metal so I moved the bracket about an inch drilled new holes and used self-tapping screws.
Read less
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 peoplefound this instruction helpful.
Denise from Landover, MD
Really Easy
Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
Lens cover for oven light broke.
0 of 1 peoplefound this instruction helpful.
Amy from Corona, CA
Really Easy
Less than 15 mins
Really a no brainer, but I do have to say that PartSelect customer service is excellent. My part was located and on it's way within a day and arrived a couple of days later.
Was this helpful?
Thank you for voting!
broil element was burned out
1 of 5 peoplefound this instruction helpful.
Joseph from Jacksonville, FL
Really Easy
Less than 15 mins
Screw drivers
took out old element put in new one and oven works as good as new
Was this helpful?
Thank you for voting!
part was spected for it's size and wattage for a custom built oven
0 of 4 peoplefound this instruction helpful.
jeff from vienna, OH
A Bit Difficult
More than 2 hours
I made a 4' h 3.5' w and 7.5' long powder / ceramic coat oven capable of 700 degrees f. the elements were chosen due to their size and capabilty. I am useing -5- 2950watt elements split on 2 40 amp 120v coil contactors regulated with a PID and thermocouople.
if iever need to do this again i will unplug the stove and take the back off. iwill remove the spade connectors from the back and remove and replace the unit from the front. from the rear i will replace the spade connectors and the insulation . plug in the stove and make sure everything works. unplugthe stove, put on the back,plug in th
... Read moree stove and position it.
My Orders
