Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Error message on display ff30
7 of 8 peoplefound this instruction helpful.
Roger from CHICAGO, IL
Really Easy
Less than 15 mins
Pliers
Slid oven out removed one screw one plug replaced part took 5 minutes.told parts repair the error message and they sent me the correct part in two days will use them again saved me from Repair man wanted 85 dollars just to look at it my cost was 28 for probe and 8 dollars for shipping already helped neighbor with their stove they needed n
... Read moreew ignighter 12 dollars repair place want 110 to come look at it this site walks you through repair best service!!!!
Read less
Was this helpful?
Thank you for voting!
Oven light bulb went dark; it needed replacing
10 of 17 peoplefound this instruction helpful.
Lise from CEDAR GROVE, NJ
Very Easy
Less than 15 mins
Twisted replacement bulb into place easily. Let there be light!
Was this helpful?
Thank you for voting!
Heating element broke
8 of 12 peoplefound this instruction helpful.
Joseph from Winter Park, FL
Really Easy
15 - 30 mins
Socket set
Removed two screws in over pulled out part took off wires and put them on new elememt
Was this helpful?
Thank you for voting!
Oven wasn't heating properly for a few months and then stopped altogether
6 of 6 peoplefound this instruction helpful.
Matt from KENNETT SQ, PA
Really Easy
15 - 30 mins
Socket set
The hardest part was pulling the oven away from the wall. Two bolts hold the sensor in place and a clip connects the electronics. Replacing the old one was trivial.
Was this helpful?
Thank you for voting!
Oven racks rusted
11 of 21 peoplefound this instruction helpful.
Wendell from Ocala, FL
Really Easy
Less than 15 mins
Ordered new racks and replaced them.
Was this helpful?
Thank you for voting!
Watch the video on line and it was really that easy to replaced the elements
6 of 6 peoplefound this instruction helpful.
Joseph from HATBORO, PA
Very Easy
Less than 15 mins
Screw drivers
Went very well and it works!
Was this helpful?
Thank you for voting!
broken lens over oven light
11 of 22 peoplefound this instruction helpful.
Leslie from Warsaw, VA
Really Easy
Less than 15 mins
Your service was OUTSTANDING...Ordered one afternoon, and before lunch time the next day, the delivery man rang my door bell...Thanks a bunch for you excellent service.....
Was this helpful?
Thank you for voting!
The elements were not heating up
6 of 8 peoplefound this instruction helpful.
Tanya from KALISPELL, MT
Really Easy
15 - 30 mins
Screw drivers
It was really easy just unplugged it took off the back cover changed the part out put back cover on plugged it in and the elements were working great!
Was this helpful?
Thank you for voting!
old element coil burned apart breaking the circuit.
6 of 8 peoplefound this instruction helpful.
James from WARRENTON, MO
A Bit Difficult
15 - 30 mins
Nutdriver, Screw drivers
removed the old burner and put the new one in it's place.
Was this helpful?
Thank you for voting!
Refrigerator Light bulb went out
7 of 12 peoplefound this instruction helpful.
ANGELA from MEBANE, NC
Very Easy
Less than 15 mins
I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.
Was this helpful?
Thank you for voting!
Overlay was destroyed from use
5 of 6 peoplefound this instruction helpful.
Doug from Laramie, WY
Really Easy
Less than 15 mins
Screw drivers
Took back off the oven unscrewed the time control scaped old one off and put new one on. Than I put it back together again. What a great place to shop!!!
Was this helpful?
Thank you for voting!
Broken ; oven door inner glass
5 of 6 peoplefound this instruction helpful.
Garland Futrell from CHESAPEAKE, VA
Very Easy
1- 2 hours
Screw drivers, Socket set
Watched the repair video on your web site. Used the video as a step by step guide in the actual repair.
Was this helpful?
Thank you for voting!
Crack in inner door glass
6 of 9 peoplefound this instruction helpful.
Robert from Richmond, IN
Really Easy
1- 2 hours
Screw drivers
Removed two screws that are attached to handle then removed four screws from bottom edge of oven door. I was then able to remove the outer door glass,this gave me access to the three inner glasses. After removing the retainer for the glass assembly,I was able to remove all three and replace the inner one.I reversed this proceedure to re
... Read moreassemble.
Read less
Was this helpful?
Thank you for voting!
Switch and Burner went out.
4 of 4 peoplefound this instruction helpful.
Lamar from ARLINGTON, TX
A Bit Difficult
1- 2 hours
Nutdriver, Pliers, Screw drivers
Replaced switch by according to video with no issues, Terminals were nearly identical as the new switch.
The terminals on the new burner were not located in the same position as the terminals on the old burner. I had to reference the wiring diagram to locate the correct wire to terminal location. There was not enough slack in t
... Read morehe wires to position the new burner in the same position as the old burner. I had to rotate the new burner so the wires would reach. This cause me to have to rotate the warming burner because rotating the new burner, the terminals interfered with the terminals on the warming burner. I also had to reposition some of the wires so they would not contact the burner and terminals.
While removing burned out light bulb, the glass cover fell to the floor of the oven and broke!!
5 of 7 peoplefound this instruction helpful.
Phyllis from GAINESVILLE, GA
Easy
Less than 15 mins
Husband very ill in bed. It's up to me!! Got a new bulb at HomeDepot and figured out how to get that wire 'thing' back in and the new glass cover installed. I DID IT!! WOW! My husband has always done these jobs around the house.......but now it's up to me.......and I'm not so dumb after all! I DID IT!! Now everyone who comes in
... Read morethe house.....I show them what I DID!! :-)
My Orders
