- Home
- 79095322302
- Instructions
79095322302 Kenmore Wall Oven - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Range would not come on
107 of 192 people
found this instruction helpful.
-
MaryLou from Monroe, NC
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Turned off power, took back off stove removed old probe.
I had to splice wires since new probe ends did not match up.
the instructions were to splice the wires. I had the breaker off for about 3 hours. this is not in the instructions, but being a widow, I had to ask a few people why it would not come on after I connected the wir ... Read more es.
After waiting, I turned the breaker on and my range came back on.
I had to splice wires since new probe ends did not match up.
the instructions were to splice the wires. I had the breaker off for about 3 hours. this is not in the instructions, but being a widow, I had to ask a few people why it would not come on after I connected the wir ... Read more es.
After waiting, I turned the breaker on and my range came back on.
Read less
Was this helpful?
Thank you for voting!
Oven wouldn't operated. Error code F9
76 of 101 people
found this instruction helpful.
-
Richard from Centennial, CO
- Really Easy
- Less than 15 mins
-
Nutdriver
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).
Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet m ... Read more etal, then 3 screws that mount the motor. Replace motor, reattach sheet metal. Plug in. Done. Ready to bake cookies.
Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet m ... Read more etal, then 3 screws that mount the motor. Replace motor, reattach sheet metal. Plug in. Done. Ready to bake cookies.
Read less
Was this helpful?
Thank you for voting!
Loud pop, circuit breaker tripped.
65 of 77 people
found this instruction helpful.
-
Vic from Yankton, SD
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver
Pulled stove out. Removed screws(5) holding top unit. Tipped top unit to get at the control panel. Removed screws holding control panel. Removed wires from old one and put on to the new one. Reinstalled top panel and turn breaker back on.PS I didn't order a new face panel so had to gentley remove from the old and put on the new panel(be
... Read more
fore reinstalling). I would suggest getting a new one when ordering this conrtol panel.
Read less
Was this helpful?
Thank you for voting!
burned out burner
70 of 99 people
found this instruction helpful.
-
Lori from Winter Haven, FL
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the differ
... Read more
ent sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
Read less
Was this helpful?
Thank you for voting!
Oven light receptacle broken - bulb base broke off
69 of 118 people
found this instruction helpful.
-
Paul from Spokane Valley, WA
- Easy
- 30 - 60 mins
-
Screw drivers
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven,
... Read more
and the new one snapped in easily from inside the oven as well. Replaced wiring, installed new bulb, restored power & tested. Replaced back cover. Good time to vacuum under/behind where the oven usually lives before sliding it back to the wall.
Read less
Was this helpful?
Thank you for voting!
Internal glass broke on the oven door
41 of 43 people
found this instruction helpful.
-
EDWARD from PHOENIX, AZ
- Easy
- 30 - 60 mins
-
Screw drivers
All the was needed was a Phillips screw driver. It's not difficult. Watch out because the door is spring loaded and does seperate quickly after all the screws are out. Be sure to watch the front panel, it appears to be heavy glass and can come out of the slots during the repair. I only had to re-assemble and dis-assemble 4 times before I
... Read more
got it right but it's still fairly easy to do if you take your time.
Read less
Was this helpful?
Thank you for voting!
Broiler element would not work
43 of 55 people
found this instruction helpful.
-
Frances from Paris, TN
- Really Easy
- 1- 2 hours
-
Pliers, Screw drivers
First my husband cut off the circuit breaker. He then removed the two screws that held the element in place and pulled the element out about 3 inches and disconnected the two wires. The rest was easy. We were impressed at how fast the element was sent. We were told about 5 days to 7 days. The element arrived on the second day. Very p
... Read more
lease with the service and the product.
Read less
Was this helpful?
Thank you for voting!
element arched or burned out
25 of 30 people
found this instruction helpful.
-
Deborah from Westfield, MA
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers
shut off breaker to appliance or unplug
remove oven racks
unscrew lock tabs at back of oven
disconect wires on both sides
discard old element reconnect new element
screw new lock tabs back in.
turn on power test oven.
remove oven racks
unscrew lock tabs at back of oven
disconect wires on both sides
discard old element reconnect new element
screw new lock tabs back in.
turn on power test oven.
Was this helpful?
Thank you for voting!
glass broke while self cleaning.
16 of 24 people
found this instruction helpful.
-
MARY from GARNERVILLE, NY
- Easy
- 30 - 60 mins
-
Screw drivers
i had to remove all the broken glass then removed the metal that was holding the glass. set the new glass in the metal strips and screwed it back togethr. i also had to remove the frame from the door in order to get to the inside glass. then i had to put the door back together.
Other Parts Used:
Was this helpful?
Thank you for voting!
Inside oven glass was cracked
12 of 14 people
found this instruction helpful.
-
JOSEPH from PATASKALA, OH
- Easy
- 15 - 30 mins
-
Screw drivers
The repair was fairly easy. The oven door was attached to a spring arm that had one screw holding each arm to the door. Once off, the outside set of screws were removed and saved in a small dish. Each section had 6-10 screws, to it's best to keep each set separate from each other. Each of the three layers (of the door) came apart easi
... Read more
ly by removing the screws for each section. The inside (broken glass) lifted out, was replaced, and the sequence was repeated in reverse. During the reassembly I was able to clean the other layers of glass that had gotten build-up on them over the years. Total time start to finish was about 30 minutes. Only tool required was a screw driver! Probably saved 100+ dollars!
Read less
Was this helpful?
Thank you for voting!
Error message on display ff30
7 of 8 people
found this instruction helpful.
-
Roger from CHICAGO, IL
- Really Easy
- Less than 15 mins
-
Pliers
Slid oven out removed one screw one plug replaced part took 5 minutes.told parts repair the error message and they sent me the correct part in two days will use them again saved me from Repair man wanted 85 dollars just to look at it my cost was 28 for probe and 8 dollars for shipping already helped neighbor with their stove they needed n
... Read more
ew ignighter 12 dollars repair place want 110 to come look at it this site walks you through repair best service!!!!
Read less
Was this helpful?
Thank you for voting!
Oven light bulb went dark; it needed replacing
10 of 17 people
found this instruction helpful.
-
Lise from CEDAR GROVE, NJ
- Very Easy
- Less than 15 mins
Twisted replacement bulb into place easily. Let there be light!
Was this helpful?
Thank you for voting!
2 elements stopped working.
9 of 14 people
found this instruction helpful.
-
Ruth from MORGANTOWN, WV
- Really Easy
- 30 - 60 mins
-
Nutdriver
My husband followed the video instructions and it was easy to fix.
Was this helpful?
Thank you for voting!
Heating element broke
8 of 12 people
found this instruction helpful.
-
Joseph from Winter Park, FL
- Really Easy
- 15 - 30 mins
-
Socket set
Removed two screws in over pulled out part took off wires and put them on new elememt
Was this helpful?
Thank you for voting!
Watch the video on line and it was really that easy to replaced the elements
6 of 6 people
found this instruction helpful.
-
Joseph from HATBORO, PA
- Very Easy
- Less than 15 mins
-
Screw drivers
Went very well and it works!
Was this helpful?
Thank you for voting!