EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79095202102 Kenmore Wall Oven - Instructions

All Instructions for the 79095202102
16 - 30 of 94

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Front Right Radiiant burner was damaged
12 of 17 people found this instruction helpful.
  • Rashiklal from Marietta, GA
  • Really Easy
  • 1- 2 hours
  • Nutdriver
Followed the instruction printed on the page, while ordering the part.
Was this helpful?
Thank you for voting!
2 elements stopped working.
9 of 14 people found this instruction helpful.
  • Ruth from MORGANTOWN, WV
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
My husband followed the video instructions and it was easy to fix.
Was this helpful?
Thank you for voting!
Oven light bulb went dark; it needed replacing
10 of 17 people found this instruction helpful.
  • Lise from CEDAR GROVE, NJ
  • Very Easy
  • Less than 15 mins
Twisted replacement bulb into place easily. Let there be light!
Was this helpful?
Thank you for voting!
Error message on display ff30
7 of 8 people found this instruction helpful.
  • Roger from CHICAGO, IL
  • Really Easy
  • Less than 15 mins
  • Pliers
Slid oven out removed one screw one plug replaced part took 5 minutes.told parts repair the error message and they sent me the correct part in two days will use them again saved me from Repair man wanted 85 dollars just to look at it my cost was 28 for probe and 8 dollars for shipping already helped neighbor with their stove they needed n ew ignighter 12 dollars repair place want 110 to come look at it this site walks you through repair best service!!!!
Was this helpful?
Thank you for voting!
Watch the video on line and it was really that easy to replaced the elements
6 of 6 people found this instruction helpful.
  • Joseph from HATBORO, PA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Went very well and it works!
Was this helpful?
Thank you for voting!
Heating element broke
8 of 12 people found this instruction helpful.
  • Joseph from Winter Park, FL
  • Really Easy
  • 15 - 30 mins
  • Socket set
Removed two screws in over pulled out part took off wires and put them on new elememt
Was this helpful?
Thank you for voting!
Oven wasn't heating properly for a few months and then stopped altogether
6 of 6 people found this instruction helpful.
  • Matt from KENNETT SQ, PA
  • Really Easy
  • 15 - 30 mins
  • Socket set
The hardest part was pulling the oven away from the wall. Two bolts hold the sensor in place and a clip connects the electronics. Replacing the old one was trivial.
Was this helpful?
Thank you for voting!
Oven door inner glass cracked after cleaning
6 of 7 people found this instruction helpful.
  • Lisa from Erial, NJ
  • Easy
  • 15 - 30 mins
  • Screw drivers
The repair went relatively easy especially after reading that another homeowner found the door to be "spring loaded". I was prepared and made sure I held onto things tightly.I removed the screws as I came to them and carefully removed the other 3 pieces of glass, finally reaching the inner panel. Putting that in and holding it as I put t he next piece back was the most difficult. Once that was in place, the rest was just a matter of redoing what I undid. Needless to say, I was a bit nervous the first time I used the oven. No problems though, works like a charm! Thanks!
Was this helpful?
Thank you for voting!
Oven door glass cracked in half
6 of 7 people found this instruction helpful.
  • Janice from Northbridge, MA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
First of all I would like to comment on how it easy it was to place this order and I was pleasantly surprised that it was rec'd the next day. Also it was the correct part that I needed. To install it, first I removed the screws and then the metal that was holding the broken glass. Once the broken glass was removed, I set the new glass in the metal strips and basically screwed it back together. Please note to be careful to remember which screws go where as they are not the same size and do not fit anywhere but where they belong. That was the only part of the job that I had a problem with.
Was this helpful?
Thank you for voting!
broken lens over oven light
11 of 22 people found this instruction helpful.
  • Leslie from Warsaw, VA
  • Really Easy
  • Less than 15 mins
Your service was OUTSTANDING...Ordered one afternoon, and before lunch time the next day, the delivery man rang my door bell...Thanks a bunch for you excellent service.....
Was this helpful?
Thank you for voting!
old element coil burned apart breaking the circuit.
6 of 8 people found this instruction helpful.
  • James from WARRENTON, MO
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Screw drivers
removed the old burner and put the new one in it's place.
Was this helpful?
Thank you for voting!
Overlay was destroyed from use
5 of 6 people found this instruction helpful.
  • Doug from Laramie, WY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Took back off the oven unscrewed the time control scaped old one off and put new one on. Than I put it back together again.
What a great place to shop!!!
Was this helpful?
Thank you for voting!
Refrigerator Light bulb went out
7 of 12 people found this instruction helpful.
  • ANGELA from MEBANE, NC
  • Very Easy
  • Less than 15 mins
I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.
Was this helpful?
Thank you for voting!
While removing burned out light bulb, the glass cover fell to the floor of the oven and broke!!
5 of 7 people found this instruction helpful.
  • Phyllis from GAINESVILLE, GA
  • Easy
  • Less than 15 mins
Husband very ill in bed. It's up to me!! Got a new bulb at HomeDepot and figured out how to get that wire 'thing' back in and the new glass cover installed. I DID IT!! WOW! My husband has always done these jobs around the house.......but now it's up to me.......and I'm not so dumb after all! I DID IT!! Now everyone who comes in the house.....I show them what I DID!! :-)
Was this helpful?
Thank you for voting!
The glass on the enter oven door was broken
4 of 4 people found this instruction helpful.
  • leslie from Pickerington, OH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
It went very well. Very quick. Just took out a couple of screws, took out the rest of the broken glass, slipped the new piece in and screwed it all back together. This was the first time I had ever tried to fix any part of a range/oven before, it was very simple...
Was this helpful?
Thank you for voting!
All Instructions for the 79095202102
16 - 30 of 94