Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
While removing burned out light bulb, the glass cover fell to the floor of the oven and broke!!
5 of 7 peoplefound this instruction helpful.
Phyllis from GAINESVILLE, GA
Easy
Less than 15 mins
Husband very ill in bed. It's up to me!! Got a new bulb at HomeDepot and figured out how to get that wire 'thing' back in and the new glass cover installed. I DID IT!! WOW! My husband has always done these jobs around the house.......but now it's up to me.......and I'm not so dumb after all! I DID IT!! Now everyone who comes in
... Read morethe house.....I show them what I DID!! :-)
Read less
Was this helpful?
Thank you for voting!
Old racks had melted plastic on them.
4 of 5 peoplefound this instruction helpful.
James from PAINESVILLE, OH
Very Easy
Less than 15 mins
It was a replace racks not repair. No problem
Was this helpful?
Thank you for voting!
replacing oven racks
4 of 5 peoplefound this instruction helpful.
Lawrence from Elmira, NY
Really Easy
Less than 15 mins
The replacement racks were spot on and the service was outstanding. had the racks in 2 days. Happy Happy Joy Joy! :)
Was this helpful?
Thank you for voting!
Repaired Oven Range Light Bulb
3 of 3 peoplefound this instruction helpful.
Alan from SAN MATEO, CA
Very Easy
Less than 15 mins
Screw drivers
The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.
Was this helpful?
Thank you for voting!
Cooktop burner was wore out from age
3 of 3 peoplefound this instruction helpful.
John from HAYDEN, AL
Very Easy
Less than 15 mins
Just pulled the old cook top burner out and put the new one in .it took about 1 1/2 minutes
Was this helpful?
Thank you for voting!
Right rear burner not working properly
3 of 3 peoplefound this instruction helpful.
Dante from SOUTHOLD, NY
Difficult
30 - 60 mins
Nutdriver, Pliers, Screw drivers
After a brief discussion with CS about the electric stove part was shipped it arrived and I proceeded to install I found it needed to be installed sideways not up & down like the old one. The terminals did not line up so I put the black lead first and the purple lead last in doing that I burned out the switch??? was not easy to install as
... Read more the video showed his switch matched each wire? My installation was sideways??
Read less
Was this helpful?
Thank you for voting!
my burners would just heat up solid red even when i had controls turned down to 2 or 3. i would have to turn controls off and back on, then they still would just go back to glowing red
3 of 3 peoplefound this instruction helpful.
Leota from AUXVASSE, MO
Really Easy
30 - 60 mins
Nutdriver, Pliers, Screw drivers
This was my first time ever working with electrical issues. My husband is not physically able to do repairs now. Very easy fix. Just viewed video repair instructions and it went exactly as instructed. Within 45 minutes, I had my stove repaired and cleaned and back in working order!! Great results. My range is working perfectly again and M
... Read moreama is happy!!
It went easy, I ordered the part from another vendor, received it in 3 days and it only took about 20 minutes to install. I do not recommend ordering from PartSelect!
Was this helpful?
Thank you for voting!
Lens cover for the oven light
3 of 4 peoplefound this instruction helpful.
Larry from COZAD, NE
Really Easy
30 - 60 mins
Very easy just had to pull the wire up that holds it secure.
Was this helpful?
Thank you for voting!
Burner switch work sometime.
3 of 4 peoplefound this instruction helpful.
junius from WICOMICO, VA
Really Easy
1- 2 hours
Nutdriver
I follow the video on your site
Was this helpful?
Thank you for voting!
Change on e of the inside glass
4 of 7 peoplefound this instruction helpful.
Ronald from Ozone Park, NY
Easy
1- 2 hours
Screw drivers
removed the screws holding the front part of the door and from there worked my way, untill the third glass. It took a couple hours, my first time,. Overall easy,
Was this helpful?
Thank you for voting!
Heating element burned out
3 of 4 peoplefound this instruction helpful.
Pat from GREELEY, CO
Very Easy
Less than 15 mins
All you do it unplug the old one and plug in the new one.
Was this helpful?
Thank you for voting!
N/A
4 of 7 peoplefound this instruction helpful.
Dineshbhai from Rincon HWY21, GA
A Bit Difficult
Less than 15 mins
Screw drivers
I had open back cover and remove the switch than replace new switch. Makesure cable conection.
Was this helpful?
Thank you for voting!
I forgot to remove something I had saved in the oven, planning to remove it before using the range.
3 of 4 peoplefound this instruction helpful.
Marilyn from Clearwater, FL
Easy
Less than 15 mins
Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience
... Read morewith those in need of you services. Thanks. Marilyn Kasson
Read less
Was this helpful?
Thank you for voting!
Original Element physically broke
2 of 2 peoplefound this instruction helpful.
Beverly from WEATOGUE, CT
Very Easy
Less than 15 mins
There is an installation video , but it was so easy, and if you clean your drip pans from those inevitable spills you can do this. I have zero mechanical abilities and I did. The website makes it easy to find your part, and the original literature you got with your appliance will direct you where to find the
... Read moreModel # and serial # on your Frigidaire Range. Order your part on line, get it in the mail and insert the Element yourself.Very happy with my transaction.
My Orders
