EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79094214404 Kenmore Range - Instructions

All Instructions for the 79094214404
46 - 60 of 244

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven temp was not right
8 of 18 people found this instruction helpful.
  • Kathy from Greentown, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
We removed the old part and replaced it then when warming the oven all of a sudden there was a loud noise and something went and so we called a repair man which I guess we should of done in the first place. Now he has ordered a part that cost 170 soo that is my story don't try to repair if you don't have experience.
Was this helpful?
Thank you for voting!
Had aluminum foil stuck on bottom
3 of 3 people found this instruction helpful.
  • George from JACKSON, MI
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Removed 2 screws, pulled out the panel, replaced the new panel and replaced the two screws. Less than 5 minutes.
Was this helpful?
Thank you for voting!
Repaired Oven Range Light Bulb
3 of 3 people found this instruction helpful.
  • Alan from SAN MATEO, CA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.
Was this helpful?
Thank you for voting!
Cooktop burner was wore out from age
3 of 3 people found this instruction helpful.
  • John from HAYDEN, AL
  • Very Easy
  • Less than 15 mins
Just pulled the old cook top burner out and put the new one in .it took about 1 1/2 minutes
Was this helpful?
Thank you for voting!
Right rear burner not working properly
3 of 3 people found this instruction helpful.
  • Dante from SOUTHOLD, NY
  • Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
After a brief discussion with CS about the electric stove part was shipped it arrived and I proceeded to install I found it needed to be installed sideways not up & down like the old one. The terminals did not line up so I put the black lead first and the purple lead last in doing that I burned out the switch??? was not easy to install as the video showed his switch matched each wire? My installation was sideways??
Was this helpful?
Thank you for voting!
my burners would just heat up solid red even when i had controls turned down to 2 or 3. i would have to turn controls off and back on, then they still would just go back to glowing red
3 of 3 people found this instruction helpful.
  • Leota from AUXVASSE, MO
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
This was my first time ever working with electrical issues. My husband is not physically able to do repairs now. Very easy fix. Just viewed video repair instructions and it went exactly as instructed. Within 45 minutes, I had my stove repaired and cleaned and back in working order!! Great results. My range is working perfectly again and M ama is happy!!
Was this helpful?
Thank you for voting!
Lens cover for the oven light
3 of 4 people found this instruction helpful.
  • Larry from COZAD, NE
  • Really Easy
  • 30 - 60 mins
Very easy just had to pull the wire up that holds it secure.
Was this helpful?
Thank you for voting!
Burner switch work sometime.
3 of 4 people found this instruction helpful.
  • junius from WICOMICO, VA
  • Really Easy
  • 1- 2 hours
  • Nutdriver
I follow the video on your site
Was this helpful?
Thank you for voting!
Change on e of the inside glass
4 of 7 people found this instruction helpful.
  • Ronald from Ozone Park, NY
  • Easy
  • 1- 2 hours
  • Screw drivers
removed the screws holding the front part of the door and from there worked my way, untill the third glass.
It took a couple hours, my first time,. Overall easy,
Was this helpful?
Thank you for voting!
Heating element burned out
3 of 4 people found this instruction helpful.
  • Pat from GREELEY, CO
  • Very Easy
  • Less than 15 mins
All you do it unplug the old one and plug in the new one.
Was this helpful?
Thank you for voting!
N/A
4 of 7 people found this instruction helpful.
  • Dineshbhai from Rincon HWY21, GA
  • A Bit Difficult
  • Less than 15 mins
  • Screw drivers
I had open back cover and remove the switch than replace new switch. Makesure cable conection.
Was this helpful?
Thank you for voting!
Original Element physically broke
2 of 2 people found this instruction helpful.
  • Beverly from WEATOGUE, CT
  • Very Easy
  • Less than 15 mins
There is an installation video , but it was so easy, and if you clean your drip pans from those inevitable spills you can do this. I have zero mechanical abilities and I did. The website makes it easy to find your part, and the original literature you got with your appliance will direct you where to find the Model # and serial # on your Frigidaire Range. Order your part on line, get it in the mail and insert the Element yourself.Very happy with my transaction.
Was this helpful?
Thank you for voting!
Burner not controlable
2 of 2 people found this instruction helpful.
  • Royce from KEENE, TX
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Removed rear panal, removed screws from of switch. Unplued wires and installed new switch and put back together. Very easy.
Was this helpful?
Thank you for voting!
Oven bottom panel rusted away
2 of 2 people found this instruction helpful.
  • Ron from CINCINNATI, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed two screws removed and replaced panel.
Was this helpful?
Thank you for voting!
Had a F1 code on the range, could not control the bake temp.
2 of 2 people found this instruction helpful.
  • David from PALATKA, FL
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
Replace the electronic control board & overlay. Tested, works great!
Was this helpful?
Thank you for voting!
All Instructions for the 79094214404
46 - 60 of 244