EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79093751102 Kenmore Range - Instructions

All Instructions for the 79093751102
16 - 30 of 55

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The Cap On The Range Door Broke
3 of 4 people found this instruction helpful.
  • Chuck from Toms River, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
There were only 2 screws that held the door handle & cap in place, removed screws & handle to get cap pieces off. Ordered new cap, - lost screws - cap delivered - no screws had to order screws, damn! They're expensive too !! Got screws, installed handle & cap, now wife is happy again!
Was this helpful?
Thank you for voting!
Lens cover for the oven light
3 of 4 people found this instruction helpful.
  • Larry from COZAD, NE
  • Really Easy
  • 30 - 60 mins
Very easy just had to pull the wire up that holds it secure.
Was this helpful?
Thank you for voting!
NO HEAT IN UPPER ELEMENT
2 of 2 people found this instruction helpful.
  • Jerome from WOOD LAKE, MN
  • Really Easy
  • 30 - 60 mins
  • Socket set
NEED A QUARTER INCH SOCKET FOR THE BOLTS. REMOVE THE BACK PANEL AND THEN YOU WILL SEE THE TWO ELECTRIC WIRES GOING TO THE TERMINALS OF THE ELEMENT. DISCONNECT AND THEN GO TO THE FRONT OF OVEN AND REMOVE THE FOUR BOLTS THAT HOLD IN THE TOP ELEMENT. SIMPLY, VERY SLOWLY PULL THE ELEMENT FORWARD UNTILL IT CLEARS THE BACK AND YOUR GOOD TO GO. DO NOT FORGET TO DISCONNECT THE POWER TO THE OVEN BEFORE YOU START!
Was this helpful?
Thank you for voting!
Broiler element fried, found nothing in town, Part Select delivered in three days
2 of 2 people found this instruction helpful.
  • Gary from TULSA, OK
  • Really Easy
  • 15 - 30 mins
  • Socket set
Pulled oven out, took the screws out of back plate cover plate with socket wrench, pulled connectors out through the back, removed the door, pushed the element rods through the two holes, connected the two wires, screwed the element in, put the hangars on for the element, put the back plate on and turned the broiler on, worked great, put the range door back on and has been working great. Great company, hope not to use them again, but good to know they are there with my part.
Gary H.
Was this helpful?
Thank you for voting!
Heating unit burnt out
2 of 2 people found this instruction helpful.
  • Richard from SUMMERFIELD, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Remove backing then unplug 2 wires and remove 2 screws, install new unit replace screws and backing plug it in all done less than 1/2 hour.
Was this helpful?
Thank you for voting!
panel behind the handle of the oven door was cracked
2 of 3 people found this instruction helpful.
  • William from Ivyland, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Once I recieved the new part it was easy to determine what two screws to remove to remove both the panel and the handle. I removed the two screws, slid the panel up and removed it. The new panel locked into place when slid down over the door and I replaced the sctews.
Was this helpful?
Thank you for voting!
Burner element failed
1 person found this instruction helpful.
  • Robert from New Castle, PA
  • Very Easy
  • 15 - 30 mins
Plugged the new one in and it worked.
I did search out Frigidaire parts and there are other types tha may or may not work. Calrod burners are not all that unusual. I went with the real thing.
Was this helpful?
Thank you for voting!
An aluminum saucepan had overheated and melted onto the element.
1 of 2 people found this instruction helpful.
  • Alice from Batesville, AR
  • Really Easy
  • Less than 15 mins
Unplugged the element and the melted on pot. Plugged in the new element. I thought I might need a whole new cooktop but a new element was very easy to find online.
Was this helpful?
Thank you for voting!
plastic spatula melted onto the unit
1 of 2 people found this instruction helpful.
  • Thomas from Port Allen, LA
  • Really Easy
  • Less than 15 mins
I unplugged the damaged unit and plugged in the new one.
Was this helpful?
Thank you for voting!
oven door BROKEN GLASS
4 of 11 people found this instruction helpful.
  • elizabeth from fall river, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Remove two screws from bottom of inside oven door slide oven door up of hinges in side of door has 2 more screws when removing hold handle it does come off at very bottom of door remove all screws cover comes off remove new glass from package and place over brackets put oven door cover back on put screws back on slide back on bracket pu t last screws on
Was this helpful?
Thank you for voting!
Inner window on my Frigidaire electric stove oven cracked
1 of 3 people found this instruction helpful.
  • Jonathan M. from Sierra Madre, CA
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers, Wrench (Adjustable)
On this website, I found an instruction manual for this stove. There were 2 pages about how to change the glass on the oven door, including diagrams. I'd also checked a generic youtube video on changing inner glass on oven doors too, although the hinges in the youtube demo weren't exactly like those in mine. I printed out the instruct ions, checked the oven door to make sure the hinges looked like those in the diagrams, set aside a couple of hours on a free day with no other distractions, and did the job. I just kept removing screws from the inside oven door, peeling back the layers of the onion, until I got to the innermost glass, which was cracked. Put the new glass in, put it back together. On youtube the guy said it would take 20 minutes. It took me about an hour. Saved a ton of money by doing it myself.
Was this helpful?
Thank you for voting!
Old cooktop burner element died.
1 of 3 people found this instruction helpful.
  • Lawrence from Plainview, NY
  • Really Easy
  • Less than 15 mins
First I unplugged the element that wasn't working and switched it with one that was to confirm that it was the burner element, and not the cooktop wiring, that was the problem. Once that was confirmed, I ordered a new element from partselect.com. Upon arrival of the new element several days later, I plugged it into the empty plug on the c ooktop and voila, we're cooking on all 4 again.
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 people found this instruction helpful.
  • Denise from Landover, MD
  • Really Easy
  • Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
No burner
0 of 1 people found this instruction helpful.
  • Janet from North Vernon, IN
  • Really Easy
  • Less than 15 mins
I just plugged it into the receptacle on the stovetop and turned the thing on, and it worked! I'd been without the 4th burner for quite some time. Nice to have it back!
Was this helpful?
Thank you for voting!
Lens cover for oven light broke.
0 of 1 people found this instruction helpful.
  • Amy from Corona, CA
  • Really Easy
  • Less than 15 mins
Really a no brainer, but I do have to say that PartSelect customer service is excellent. My part was located and on it's way within a day and arrived a couple of days later.
Was this helpful?
Thank you for voting!
All Instructions for the 79093751102
16 - 30 of 55