EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79090801404 Kenmore Range - Instructions

All Instructions for the 79090801404
61 - 75 of 367

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drip bowels needed to be replaced
3 of 3 people found this instruction helpful.
  • Francine from OTEGO, NY
  • Very Easy
  • Less than 15 mins
I just took the old ones out and replaced them with the new ones. It took less than 5 minutes.
Was this helpful?
Thank you for voting!
Cooktop burner was wore out from age
3 of 3 people found this instruction helpful.
  • John from HAYDEN, AL
  • Very Easy
  • Less than 15 mins
Just pulled the old cook top burner out and put the new one in .it took about 1 1/2 minutes
Was this helpful?
Thank you for voting!
Right rear burner not working properly
3 of 3 people found this instruction helpful.
  • Dante from SOUTHOLD, NY
  • Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
After a brief discussion with CS about the electric stove part was shipped it arrived and I proceeded to install I found it needed to be installed sideways not up & down like the old one. The terminals did not line up so I put the black lead first and the purple lead last in doing that I burned out the switch??? was not easy to install as the video showed his switch matched each wire? My installation was sideways??
Was this helpful?
Thank you for voting!
Bottom element burned up
3 of 3 people found this instruction helpful.
  • Peggy from PORTLAND, OR
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
I am 78 years old and I watched the how to video twice and then did it so if I can do it anyone can,oh and I am a woman
Was this helpful?
Thank you for voting!
my burners would just heat up solid red even when i had controls turned down to 2 or 3. i would have to turn controls off and back on, then they still would just go back to glowing red
3 of 3 people found this instruction helpful.
  • Leota from AUXVASSE, MO
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
This was my first time ever working with electrical issues. My husband is not physically able to do repairs now. Very easy fix. Just viewed video repair instructions and it went exactly as instructed. Within 45 minutes, I had my stove repaired and cleaned and back in working order!! Great results. My range is working perfectly again and M ama is happy!!
Was this helpful?
Thank you for voting!
Burner switch work sometime.
3 of 4 people found this instruction helpful.
  • junius from WICOMICO, VA
  • Really Easy
  • 1- 2 hours
  • Nutdriver
I follow the video on your site
Was this helpful?
Thank you for voting!
Broiler broke apart in pieces. Also we found an round honeycomb part
3 of 4 people found this instruction helpful.
  • Betty from KNIGHTDALE, NC
  • Really Easy
  • 30 - 60 mins
in the bottom of the oven when I was looking to see what was going on. My husband did the repair just as the video described. I suspect this part honeycomb round maybe ceramic piece goes over where the heat is vented from the oven. Where do I get another one of these and how does it attach in the oven-under t he burner. HELP I tried to look on the schematics and did not see anything. The repair went fine, except when we turned everything back on it did not work. Then my husband remembered he forgot to plug the new part IN. Once plugged in it is working fine. Thanks
Was this helpful?
Thank you for voting!
Heating element burned out
3 of 4 people found this instruction helpful.
  • Pat from GREELEY, CO
  • Very Easy
  • Less than 15 mins
All you do it unplug the old one and plug in the new one.
Was this helpful?
Thank you for voting!
N/A
4 of 7 people found this instruction helpful.
  • Dineshbhai from Rincon HWY21, GA
  • A Bit Difficult
  • Less than 15 mins
  • Screw drivers
I had open back cover and remove the switch than replace new switch. Makesure cable conection.
Was this helpful?
Thank you for voting!
The Cap On The Range Door Broke
3 of 4 people found this instruction helpful.
  • Chuck from Toms River, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
There were only 2 screws that held the door handle & cap in place, removed screws & handle to get cap pieces off. Ordered new cap, - lost screws - cap delivered - no screws had to order screws, damn! They're expensive too !! Got screws, installed handle & cap, now wife is happy again!
Was this helpful?
Thank you for voting!
I forgot to remove something I had saved in the oven, planning to remove it before using the range.
3 of 4 people found this instruction helpful.
  • Marilyn from Clearwater, FL
  • Easy
  • Less than 15 mins
Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience with those in need of you services. Thanks. Marilyn Kasson
Was this helpful?
Thank you for voting!
Original Element physically broke
2 of 2 people found this instruction helpful.
  • Beverly from WEATOGUE, CT
  • Very Easy
  • Less than 15 mins
There is an installation video , but it was so easy, and if you clean your drip pans from those inevitable spills you can do this. I have zero mechanical abilities and I did. The website makes it easy to find your part, and the original literature you got with your appliance will direct you where to find the Model # and serial # on your Frigidaire Range. Order your part on line, get it in the mail and insert the Element yourself.Very happy with my transaction.
Was this helpful?
Thank you for voting!
Worn Drip Bowls
2 of 2 people found this instruction helpful.
  • River Oaks Town Homes from DES MOINES, IA
  • Very Easy
  • Less than 15 mins
Pulled out the old drip bowls and replaced with the new. A simple snap!
Was this helpful?
Thank you for voting!
Burner not controlable
2 of 2 people found this instruction helpful.
  • Royce from KEENE, TX
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Removed rear panal, removed screws from of switch. Unplued wires and installed new switch and put back together. Very easy.
Was this helpful?
Thank you for voting!
the burner stop working
2 of 2 people found this instruction helpful.
  • Anthony J from HAMMONTON, NJ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Just followed the instructions
Was this helpful?
Thank you for voting!
All Instructions for the 79090801404
61 - 75 of 367