79071343708 Kenmore Range - Parts

This igniter has a short wire harness. The wire length is approximately 6 inches long.

This surface burner igniter and orifice holder assembly is a genuine replacement part designed for select rear burners on compatible gas ranges. It combines two essential functions: the igniter electrode generates the spark needed to ignite the gas, while the orifice holder directs the gas flow to the burner head for a consistent and cont...Read morerolled flame. This integrated assembly ensures reliable ignition and efficient burner performance. It is engineered to meet original manufacturer specifications, providing a secure fit and dependable operation. Common symptoms of failure include delayed ignition, uneven flames, or burners that fail to light. Always verify compatibility with your specific model before installation.

12K

Sold individually.

This burner head is used on gas stovetops. It is located underneath the burner cap.

NOTE: Control board is NOT included. Overlay only.

This oven door light switch signals the light to turn off when the oven door closes. If your light switch is defective or you smell a burning odor, make sure to check the switch and replace it. The tool needed for this replacement is a screwdriver. Locate the switch, usually from under the oven top. Remove the wires and pull the switch ou...Read moret. Refer to the diagram provided by the manufacturer for further instructions and guidance before installation. Make sure you remember to unplug the oven from the power source before starting this repair, and wear gloves for protection.

This gas oven safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.