My Orders
- Home
- 79045589902
- Instructions
79045589902 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
top electric burner not working
3 of 3 people
found this instruction helpful.
-
Frank from CHESTERTOWN, NY
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
2 screws disconnected old one and pulled out the new one in put in opposite way. The representative was so helpful, part came fast. thank you
Was this helpful?
Thank you for voting!
Heating element burned out
3 of 4 people
found this instruction helpful.
-
Pat from GREELEY, CO
- Very Easy
- Less than 15 mins
All you do it unplug the old one and plug in the new one.
Was this helpful?
Thank you for voting!
Lens cover for the oven light
3 of 4 people
found this instruction helpful.
-
Larry from COZAD, NE
- Really Easy
- 30 - 60 mins
Very easy just had to pull the wire up that holds it secure.
Was this helpful?
Thank you for voting!
sensor should pull into oven enough to easily unsnap and snap but didn't pull out
3 of 5 people
found this instruction helpful.
-
Mary from EDGAR, WI
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers
on the back side of the wall oven the sensor wire was ziptied tight. we had to totally pull oven out of its wall space, remove back panel, unhook zip tie, feed through sensor hole around insulation, connect and then replace back and return and relevel the oven. I have
Was this helpful?
Thank you for voting!
Original Element physically broke
2 of 2 people
found this instruction helpful.
-
Beverly from WEATOGUE, CT
- Very Easy
- Less than 15 mins
There is an installation video , but it was so easy, and if you clean your drip pans from those inevitable spills you can do this. I have zero mechanical abilities and I did. The website makes it easy to find your part, and the original literature you got with your appliance will direct you where to find the
... Read more
Model # and serial # on your Frigidaire Range. Order your part on line, get it in the mail and insert the Element yourself.Very happy with my transaction.
Read less
Was this helpful?
Thank you for voting!
Heavy jam boiler caused elements to sag
2 of 3 people
found this instruction helpful.
-
Danny L from CHELAN, WA
- Really Easy
- Less than 15 mins
Removed the old & simply inserted the new one
Was this helpful?
Thank you for voting!
8" stove top element would not warm up.
2 of 3 people
found this instruction helpful.
-
Margaret from Spencer, OH
- Really Easy
- Less than 15 mins
It was simple.............the range-top tilts up so I proped it with a stick of wood, pulled out the old burner and plugged in the new one (when I saw how inexpensive the new element was I orderd two to replace the other 8" because it didn't look long for this world either). The whole operation took less than 10 min. no tools or batteries
... Read more
required!!!!!!!!!.........no-mus-no -fus.
Your prices were the lowest I found on-line, keep up the great work!!!!!!!!!
Your prices were the lowest I found on-line, keep up the great work!!!!!!!!!
Read less
Was this helpful?
Thank you for voting!
dead burner
3 of 7 people
found this instruction helpful.
-
Jan from Storm Lake, IA
- Really Easy
- Less than 15 mins
I unplugged the dead burner and plugged in the new burner. Very easy. No tools needed.
Was this helpful?
Thank you for voting!
burner was damaged
1 person
found this instruction helpful.
-
Thomas from Elizabeth City, NC
- Really Easy
- Less than 15 mins
snap out the old one and snap in the new
Was this helpful?
Thank you for voting!
Cracked display
1 person
found this instruction helpful.
-
Dennis from LAVACA, AR
- Really Easy
- Less than 15 mins
-
Pliers
Peel off old ( might have to use a putty blade to get it started] then put on the new overlay.
Was this helpful?
Thank you for voting!
Burner element failed
1 person
found this instruction helpful.
-
Robert from New Castle, PA
- Very Easy
- 15 - 30 mins
Plugged the new one in and it worked.
I did search out Frigidaire parts and there are other types tha may or may not work. Calrod burners are not all that unusual. I went with the real thing.
I did search out Frigidaire parts and there are other types tha may or may not work. Calrod burners are not all that unusual. I went with the real thing.
Was this helpful?
Thank you for voting!
Burner cooked things very SLOWLY.
1 of 2 people
found this instruction helpful.
-
Kathy from Fremont, OH
- Really Easy
- Less than 15 mins
Pulled old burner out, pushed new one in. WHAT A DIFFERENCE!! Heats very quickly, now.
Was this helpful?
Thank you for voting!
An aluminum saucepan had overheated and melted onto the element.
1 of 2 people
found this instruction helpful.
-
Alice from Batesville, AR
- Really Easy
- Less than 15 mins
Unplugged the element and the melted on pot. Plugged in the new element. I thought I might need a whole new cooktop but a new element was very easy to find online.
Was this helpful?
Thank you for voting!
plastic spatula melted onto the unit
1 of 2 people
found this instruction helpful.
-
Thomas from Port Allen, LA
- Really Easy
- Less than 15 mins
I unplugged the damaged unit and plugged in the new one.
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 people
found this instruction helpful.
-
Denise from Landover, MD
- Really Easy
- Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!