79032643319 Kenmore Range - Parts

The LP conversion kit is used in ranges

The surface Meduim 9.5K burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner head from cooking spills. Without the cap you can have a burning gas torch. If your cap is missing or is discolored, replacing this part ca...Read moren solve the issue. This part comes in the color black. Remember to unplug your range from the power source and allow surface to cool before installing this part. Refer to the manual provided by the manufacturer for further installation instructions.

Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills.

Sold Individually.

This meat probe sensor is an authentic manufacturer replacement part for cooking appliances that have a built-in meat probe feature. It is plugged into the receptacle assembly for use inside the appliance. The sensor measures the internal temperature of meat during the cooking process and sends the readings to the control panel where they...Read more can be viewed in real time. This ensures that the food is cooked to your desired level of doneness. Over time the internal sensor components may become faulty or the probe can fail due to mechanical damage resulting in inaccurate temperature readings, and failure to communicate with the control panel. Follow the sensor cable to the insertion point in the oven cavity and disconnect the faulty sensor. Install the new sensor into the insertion point and reattach the connectors to complete the repair.

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

This is a genuine use wci regulator, which works with ranges.

This dual gas safety valve is a critical oven component designed to regulate and safeguard the flow of gas to both the bake and broil burners. Engineered for safe operation, the valve remains closed until the igniter reaches the proper operating temperature, ensuring gas is released only when ignition can occur and preventing unburned gas...Read more from entering the oven cavity. By precisely managing gas flow, it supports consistent heating performance, reliable ignition, and safe cooking operation. Replacement is commonly required when the igniter glows but the burner does not light, the oven fails to heat properly, heating is inconsistent, or the valve no longer shuts off completely. Installing a properly functioning safety valve helps restore dependable oven operation, stable temperatures, and safe day-to-day use.

This fan blade retainer nut in your oven secures the fan blade onto the motor shaft, preventing it from coming loose during operation. You can typically find it at the back of your oven behind a cover. If you notice that the fan blade becomes wobbly or does not rotate smoothly, or your oven starts to make rattling or scraping sounds, the ...Read morenut may be damaged. If the fan blade cannot spin properly, your food may cook unevenly. Your oven will also work harder and consume more energy to maintain the desired temperature. To access the nut, you will need to remove the back panel of your oven. Remove any screws or release any clips holding it using a screwdriver. To remove the nut itself, you will need either a wrench or a pair of pliers to loosen it from the motor shaft. The fan blade is sold separately from this genuine OEM nut.

This replacement light bulb provides clear illumination to improve visibility during appliance operation. It is commonly replaced when the original bulb burns out, flickers, or no longer produces adequate light.